FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Mon Jan 30, 2012 2:58 pm

In this video we do a POI test with the FNP 45 TAC and 45Osprey.

Click on the link below to view the video:

http://www.youtube.com/user/Silencerco? ... f8tdMOFwto

Be sure to watch all of our videos in HD 720p or 1080p.

yamatitan · Post by **yamatitan** » Mon Jan 30, 2012 5:27 pm

How can you check if this will be a problem on your FN Tac. I plan on buying this host soon and already have a .578x28 piston for my Osprey. Should I just trade it out now?

shootertom · Post by **shootertom** » Mon Jan 30, 2012 8:25 pm

Thanks for another great video Kenny!

yamatitan-per the video I would recommend calling Mike and having him send you the new piston. I appears as though the shoulders of the barrels are not all perfectly squared. They now make newer pistons that shoulder on the nose of the threads. Im doing the same on a fnp tac and am happy they took care of the issue. Great job to the guys at Silencerco.

03RangerXLT · Post by **03RangerXLT** » Tue Jan 31, 2012 4:35 am

I just recently got my 45 osprey back from you guys after an issue shooting it in my 45 tac, with the new/modified piston. The piston rotates just a hair in either direction when installed in the osprey. It appears there is just a slight mount of play where the three lugs on the suppressor interface with the three slots on the piston body. Is this OK? Because of it, when the suppressor is screwed into the barrel, it allows the suppressor to be rotated in either direction just a hair. I know I've asked about this before but I just want to double check and get an official response. Thanks!

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Tue Jan 31, 2012 11:09 am

yamatitan wrote:How can you check if this will be a problem on your FN Tac. I plan on buying this host soon and already have a .578x28 piston for my Osprey. Should I just trade it out now?

Yes I would trade it in. If you have any questions or concerns about it this give Mike Pappas a call. (801) 417-5384 ask for Mike

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Tue Jan 31, 2012 11:14 am

03RangerXLT wrote:I just recently got my 45 osprey back from you guys after an issue shooting it in my 45 tac, with the new/modified piston. The piston rotates just a hair in either direction when installed in the osprey. It appears there is just a slight mount of play where the three lugs on the suppressor interface with the three slots on the piston body. Is this OK? Because of it, when the suppressor is screwed into the barrel, it allows the suppressor to be rotated in either direction just a hair. I know I've asked about this before but I just want to double check and get an official response. Thanks!

Give Mike Pappas a call and he will take care of you. (801) 417-5384

Big Bore Lover · Post by **Big Bore Lover** » Tue Jan 31, 2012 4:23 pm

Thanks guys. I got the new piston a few days after I talked to Mike. You guys ROCK.
Thanks again

yamatitan · Post by **yamatitan** » Tue Jan 31, 2012 5:48 pm

Kenny_SilencerCo wrote:
yamatitan wrote:How can you check if this will be a problem on your FN Tac. I plan on buying this host soon and already have a .578x28 piston for my Osprey. Should I just trade it out now?
Yes I would trade it in. If you have any questions or concerns about it this give Mike Pappas a call. (801) 417-5384 ask for Mike

Thanks I will give him a call tomorrow.

FNP 45 TAC w/ 45Osprey POI test (VIDEO)

FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)

Re: FNP 45 TAC w/ 45Osprey POI test (VIDEO)