Osprey45 piston Oring replacement

Fireman1291 · Post by **Fireman1291** » Sat May 19, 2012 9:09 am

Does anyone know the mcmastercarr code for the small Oring that goes on the inside of the threaded portion and engages the host pistols threads? Mine is apparently gone, must have ripped.

Fireman1291 · Post by **Fireman1291** » Sun May 20, 2012 7:43 am

Can anyone from Sco help a brother out?

KimberMike · Post by **KimberMike** » Sun May 20, 2012 4:03 pm

Are the o-rings at the bottom of this page http://www.silencerco.com/store/index.p ... sprey.html the same ones you speak of? Only a couple of dollars.

Mike

Fireman1291 · Post by **Fireman1291** » Sun May 20, 2012 7:06 pm

KimberMike wrote:Are the o-rings at the bottom of this page http://www.silencerco.com/store/index.p ... sprey.html the same ones you speak of? Only a couple of dollars.

Mike

For a couple bucks more I can get 50 from mcmastercarr

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Mon May 21, 2012 10:38 am

Fireman1291 wrote:Does anyone know the mcmastercarr code for the small Oring that goes on the inside of the threaded portion and engages the host pistols threads? Mine is apparently gone, must have ripped.

What product? The 22Sparrow or a piston?

Fireman1291 · Post by **Fireman1291** » Mon May 21, 2012 12:27 pm

Kenny_SilencerCo wrote:
Fireman1291 wrote:Does anyone know the mcmastercarr code for the small Oring that goes on the inside of the threaded portion and engages the host pistols threads? Mine is apparently gone, must have ripped.
What product? The 22Sparrow or a piston?

The o-ring on the piston for my osprey45. I'm assuming my hk 45 tac threads chewed it up and I just noticed it when I cleaned it.

I just ordered another piston from you guys for my mk23 that's coming in but I noticed after you had already shipped the piston.... Doh

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Mon May 21, 2012 4:25 pm

You can get the 16mm piston o-rings at http://www.oringswest.com/
Part #: V75-M1X14B

Hope that helps?

Fireman1291 · Post by **Fireman1291** » Mon May 21, 2012 6:37 pm

Kenny_SilencerCo wrote:You can get the 16mm piston o-rings at http://www.oringwest.com
Part #: V75-M1X14B

Hope that helps?

Bad link?

jh1990 · Post by **jh1990** » Tue May 22, 2012 2:38 am

He meant this http://www.oringswest.com/

Fireman1291 · Post by **Fireman1291** » Tue May 22, 2012 5:33 am

jh1990 wrote:He meant this http://www.oringswest.com/

Thanks for the help

However they only sell to businesses. I remember ordering the 9mm Osprey cam orings from McMastercarr awhile back when Josh gave me the code. I wonder if they sell the Oring I need....

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Tue May 22, 2012 9:59 am

jh1990 wrote:He meant this http://www.oringswest.com/

Thanks for the edit

Topper · Post by **Topper** » Wed May 23, 2012 9:05 pm

Hey Kenny, any rough ETA for these to get back in stock?

http://www.silencerco.com/store/index.p ... rings.html

Abiqua · Post by **Abiqua** » Wed May 23, 2012 11:42 pm

Topper wrote:Hey Kenny, any rough ETA for these to get back in stock?

http://www.silencerco.com/store/index.p ... rings.html

I'm in need also.

mbogo · Post by **mbogo** » Sun Aug 12, 2012 2:12 pm

Tagging for future reference.

mbogo

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Mon Aug 13, 2012 10:15 am

Topper wrote:Hey Kenny, any rough ETA for these to get back in stock?

http://www.silencerco.com/store/index.p ... rings.html

They are back in stock!

http://www.superiorsilence.com/collecti ... rco/osprey

Kenny_SilencerCo · Post by **Kenny_SilencerCo** » Mon Aug 13, 2012 10:15 am

mbogo wrote:Tagging for future reference.

mbogo

http://www.superiorsilence.com/collecti ... rco/osprey

Sorry for the wait.

Vesper · Post by **Vesper** » Sat Nov 01, 2014 9:47 am

Does anyone know what size the oring is on a Octane booster that is 13.5x1LH thread? Those oring packs from silencershop are way to expensive for only 2.

AlabamaPaul · Post by **AlabamaPaul** » Sat Nov 01, 2014 10:03 am

Vesper wrote:Does anyone know what size the oring is on a Octane booster that is 13.5x1LH thread? Those oring packs from silencershop are way to expensive for only 2.

Size 18 Viton...

ETA: $12.29/100 at Amazon..

Vesper · Post by **Vesper** » Sat Nov 01, 2014 10:15 am

AlabamaPaul wrote:
Vesper wrote:Does anyone know what size the oring is on a Octane booster that is 13.5x1LH thread? Those oring packs from silencershop are way to expensive for only 2.
Size 18 Viton...

ETA: $12.29/100 at Amazon..

Thank you so much!!!

Vesper · Post by **Vesper** » Sat Nov 01, 2014 1:30 pm

AlabamaPaul wrote:
Vesper wrote:Does anyone know what size the oring is on a Octane booster that is 13.5x1LH thread? Those oring packs from silencershop are way to expensive for only 2.
Size 18 Viton...

ETA: $12.29/100 at Amazon..

Can you send me the link? Cant find.

AlabamaPaul · Post by **AlabamaPaul** » Sat Nov 01, 2014 5:49 pm

http://www.amazon.com/gp/product/B000MN ... PDKIKX0DER

Vesper · Post by **Vesper** » Sat Nov 08, 2014 5:19 pm

The order arrived today. Wrong size. That said, can someone help me find where I can order a bunch of orings for a 13.5x1LH threaded booster for s SiCo Octane?

Vesper · Post by **Vesper** » Wed Nov 12, 2014 7:06 am

rimshaker · Post by **rimshaker** » Wed Nov 12, 2014 9:52 am

The inner o-ring for a M13.5x1 piston is 12mm(ID)x1mm, or 14mm(OD)x1mm

McMaster part# 9263K287

Can't seem to find the metric sized Viton o-rings on amazon at the moment.

Dieseljay · Post by **Dieseljay** » Mon Dec 29, 2014 11:16 am

http://www.amazon.com/gp/aw/d/B005RUP2Q0?vs=1

ID:12mm x1mm
oD:14mm x1mm
For the 9mm 13.5x1lh barrel.
Only 25 packs.

Osprey45 piston Oring replacement

Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement

Re: Osprey45 piston Oring replacement