SBR Denial

Machineguns, assault rifles, subguns, SBRs, etc. Photos, questions, discussion. General talk.

Moderators: mpallett, bakerjw

Post Reply
Bmountt
Member
Posts: 26
Joined: Thu Aug 06, 2015 11:18 pm

SBR Denial

Post by Bmountt »

I applied to SBR my first rifle last December and received a denial today. I applied to use a lower from DRD Tactical, which was in the system. Under the drop down boxes for the model and caliber were options that didn't exactly correspond to my rifle so I chose the best fit since I couldn't add or change what they had. I submitted it with AR15, as opposed to the CDR-15 stamped on mine, and the only caliber was 5.56, where mine is 300blk with the receiver marked " MULTI".

Today I received an email requesting a photo of my lower and after submitting it I received an email that it's disapproved for listing the wrong model and my tax is being refunded. Nothing was mentioned about the caliber, mind you. From what I'd read, I thought you could make corrections without submitting a new form and tax stamp fee? I plan to ask guidance on how to complete the form since it doesn't have appropriate options in the drop down menus, but if anyone else has run into this any advice would be appreciated.

Brandon
Tony M.
Silent But Deadly
Posts: 368
Joined: Wed Jul 31, 2013 11:42 pm
Location: FL

Re: SBR Denial

Post by Tony M. »

Bmountt wrote:I applied to SBR my first rifle last December and received a denial today. I applied to use a lower from DRD Tactical, which was in the system. Under the drop down boxes for the model and caliber were options that didn't exactly correspond to my rifle so I chose the best fit since I couldn't add or change what they had. I submitted it with AR15, as opposed to the CDR-15 stamped on mine, and the only caliber was 5.56, where mine is 300blk with the receiver marked " MULTI".

Today I received an email requesting a photo of my lower and after submitting it I received an email that it's disapproved for listing the wrong model and my tax is being refunded. Nothing was mentioned about the caliber, mind you. From what I'd read, I thought you could make corrections without submitting a new form and tax stamp fee? I plan to ask guidance on how to complete the form since it doesn't have appropriate options in the drop down menus, but if anyone else has run into this any advice would be appreciated.

Brandon
Write an Email to [email protected]. and tell him what's happened. He's been very helpful for me and others in the past.
Bmountt
Member
Posts: 26
Joined: Thu Aug 06, 2015 11:18 pm

Re: SBR Denial

Post by Bmountt »

Thanks.. I'll shoot him an email tmrw and see if maybe I can get this fixed without having to reapply
User avatar
T-Rex
Silent But Deadly
Posts: 1865
Joined: Wed Oct 29, 2014 3:38 pm
Location: CT - The AntiConstitution State

Re: SBR Denial

Post by T-Rex »

I hope Gary can help. I actually left him a message today.

Theres a check box that says "My item description is not in the list, create new item.". Once you click this you put in the correct info.

Image
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
User avatar
mars
Senior Silent Operator
Posts: 146
Joined: Thu Jul 07, 2011 10:29 am

Re: SBR Denial

Post by mars »

Corrections can't be made because it was an e-form, that's what my denial email states. Just create a new form with the correct model #, and follow these directions: https://www.guntrustlawyer.com/2014/07/ ... orm-i.html

Got mine approved within the day, not another 4 month wait. Good luck!
the POWPOW now goes powpow
Bmountt
Member
Posts: 26
Joined: Thu Aug 06, 2015 11:18 pm

Re: SBR Denial

Post by Bmountt »

Thanks for the replies. I emailed the examiner on it, Jesse Huff, and explained what happened. He went in and added the options I needed so it wouldn't have to go into research, then told me to send him my new control number after I reapplied. The new application was approved less than 24 hrs after the original was denied. The system sucks but customer service is great.
User avatar
Modeler
Member
Posts: 44
Joined: Sun Sep 08, 2013 1:15 pm

Re: SBR Denial

Post by Modeler »

The same thing happened to me. I was SBR'ing a Spike's Tactical lower and listed the model as "AR-15" instead of "ST-15". It was denied, I called the examiner and chatted with him. I reapplied and e-mailed the new application number, it was approved the following morning. I commend them for their effort!
bronko1975
Member
Posts: 13
Joined: Fri Mar 13, 2015 10:10 pm

Re: SBR Denial

Post by bronko1975 »

I was disapproved last week for forgetting to fill in reason box. I submitted a new form at 2pm and emailed Gary and gave him the control #'S. I got an email for my approval around midnight
clark4283
Member
Posts: 44
Joined: Mon Jun 25, 2012 6:18 pm
Location: North Carolina

Re: SBR Denial

Post by clark4283 »

Bmountt wrote:Thanks for the replies. I emailed the examiner on it, Jesse Huff, and explained what happened. He went in and added the options I needed so it wouldn't have to go into research, then told me to send him my new control number after I reapplied. The new application was approved less than 24 hrs after the original was denied. The system sucks but customer service is great.
Jesse did the same for me but it only took 2 hours.
LawBob
Silent But Deadly
Posts: 388
Joined: Wed Jan 21, 2009 10:23 pm

Re: SBR Denial

Post by LawBob »

No Multi

Title 1 guns can be multi.

Title 2 no multi.
Post Reply