I am finally getting around to submitting a form 1 for a side-by-side shotgun. I know you can only submit an application for an SBS, so what should I put on the dimensions for overall length if I am intending to create an AOW?
The gun currently has a 20” barrel with an OAL of 36” with the stock.
Here are the proposed lengths:
Barrel: 8” (will be once form is received)
OAL with chopped barrel: 24”
OAL with chopped barrel – final pistol grip-only configuration: 16”
Anyone else done one of these? What did you use for the dimensions?
SBS / AOW Form 1 dimensions
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: SBS / AOW Form 1 dimensions
dan9591 wrote:I am finally getting around to submitting a form 1 for a side-by-side shotgun. I know you can only submit an application for an SBS, so what should I put on the dimensions for overall length if I am intending to create an AOW?
The gun currently has a 20” barrel with an OAL of 36” with the stock.
Here are the proposed lengths:
Barrel: 8” (will be once form is received)
OAL with chopped barrel: 24”
OAL with chopped barrel – final pistol grip-only configuration: 16”
Anyone else done one of these? What did you use for the dimensions?
SBS shotguns come in a wide range of gauges.I did cut a 36" SBS 10 gauge to 18.5" and was sorry I did not stop at 24".
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
-
- Senior Silent Operator
- Posts: 125
- Joined: Fri Jun 06, 2008 9:08 pm
Re: SBS / AOW Form 1 dimensions
your OAL and barrel length are whatever your final dimensions will be.
A SBS doesn't require a stock to be a SBS, so even in AOW configuration it is still a SBS.
You could fill out the form 1 with either of the OAL dimensions you listed if you cut barrels first, but if it were me I'd want the paperwork to be how I plan on keeping it.
A SBS doesn't require a stock to be a SBS, so even in AOW configuration it is still a SBS.
You could fill out the form 1 with either of the OAL dimensions you listed if you cut barrels first, but if it were me I'd want the paperwork to be how I plan on keeping it.