Where to engrave 10/22 ZK-22 SBR?
Posted: Tue Jun 07, 2016 9:23 am
My kids fell in love with the ZK-22 stock: http://www.sportsmansguide.com/product/ ... ?a=1770074
After getting frustrated at not being able to find a threaded 18.5” barrel without a ridiculous price tag, I decided to just bite the bullet and submit a form 1 for a 10/22 receiver. The plan is to use a 10” barrel with a 5” SilencerCo Sparrow suppressor. This will be just long enough to have about an inch sticking out of the front of the stock.
Now the issue is where to engrave it. The stock covers the entire receiver with just a slot to read the serial number. I really don’t want to start cutting the stock.
The barrel will stick out a little through the top slot in front of the charging handle, but not enough to fit ATF requirements.
Has anyone done one of these before? Where did you engrave the receiver to make it visible without disassembling the stock?
PS – yes, I know the history of this brand and I acknowledge that I would rather not own anything from them. That all being said, this really is a pretty cool stock…
After getting frustrated at not being able to find a threaded 18.5” barrel without a ridiculous price tag, I decided to just bite the bullet and submit a form 1 for a 10/22 receiver. The plan is to use a 10” barrel with a 5” SilencerCo Sparrow suppressor. This will be just long enough to have about an inch sticking out of the front of the stock.
Now the issue is where to engrave it. The stock covers the entire receiver with just a slot to read the serial number. I really don’t want to start cutting the stock.
The barrel will stick out a little through the top slot in front of the charging handle, but not enough to fit ATF requirements.
Has anyone done one of these before? Where did you engrave the receiver to make it visible without disassembling the stock?
PS – yes, I know the history of this brand and I acknowledge that I would rather not own anything from them. That all being said, this really is a pretty cool stock…