I have an RRA AR 15 9mm 16 " Upper with a screw on can.
I sent in for a RRA 10.5" BBL upper
I sent in the form 1 to do this
Question: When I get my stamp and install the 10.5"
upper and use the can, will I still have to load/shoot sub sonic
9mm in it or can I use regular 9mm 115/125?
Thank you
8th
SBR question
- RamblinMan
- Silent But Deadly
- Posts: 179
- Joined: Mon Mar 08, 2010 3:44 am
Re: SBR question
Subsonic: yes.
You also need to do a search for "constructive intent." Do not be caught having all the parts for your new SBR in your possession before you get your Form 1 approval, even if they are not assembled. The easiest way to do this is not to possess your barrel until you get your Form 1 back.
No short barrel = no SBR.
You also need to do a search for "constructive intent." Do not be caught having all the parts for your new SBR in your possession before you get your Form 1 approval, even if they are not assembled. The easiest way to do this is not to possess your barrel until you get your Form 1 back.
No short barrel = no SBR.
[img]http://i752.photobucket.com/albums/xx167/RamblinManPB/General/TS.jpg[/img]
-
- Silent But Deadly
- Posts: 217
- Joined: Wed Jul 11, 2007 7:27 am
- Location: SOUTH WEST GA
Re: SBR question
You can shoot any 9mm ammo in it. 115 gr is fine.
Political correctness is a doctrine, fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end......
-
- Member
- Posts: 37
- Joined: Tue Jul 06, 2010 3:25 pm
- Location: NW In
Re: SBR question
Thanks, the upper will never be in my possession till the paperwork
gets here. So if I get this right-I could use regular 9mm in my SBR
with the suppressor and it will work?
8th
gets here. So if I get this right-I could use regular 9mm in my SBR
with the suppressor and it will work?
8th
Re: SBR question
It will work....but subsonic will be quieter. You will still get the sonic crack with the 115/124
-
- Member
- Posts: 37
- Joined: Tue Jul 06, 2010 3:25 pm
- Location: NW In
Re: SBR question
29,
Thank you.
8th
Thank you.
8th