Page 1 of 1
SBR question
Posted: Fri Oct 22, 2010 1:05 pm
by 8th SPS USAF
I have an RRA AR 15 9mm 16 " Upper with a screw on can.
I sent in for a RRA 10.5" BBL upper
I sent in the form 1 to do this
Question: When I get my stamp and install the 10.5"
upper and use the can, will I still have to load/shoot sub sonic
9mm in it or can I use regular 9mm 115/125?
Thank you
8th
Re: SBR question
Posted: Fri Oct 22, 2010 2:47 pm
by RamblinMan
Subsonic: yes.
You also need to do a search for "constructive intent." Do not be caught having all the parts for your new SBR in your possession before you get your Form 1 approval, even if they are not assembled. The easiest way to do this is not to possess your barrel until you get your Form 1 back.
No short barrel = no SBR.
Re: SBR question
Posted: Sat Oct 23, 2010 11:35 am
by dvanncvann
You can shoot any 9mm ammo in it. 115 gr is fine.
Re: SBR question
Posted: Sat Oct 23, 2010 1:41 pm
by 8th SPS USAF
Thanks, the upper will never be in my possession till the paperwork
gets here. So if I get this right-I could use regular 9mm in my SBR
with the suppressor and it will work?
8th
Re: SBR question
Posted: Sat Oct 23, 2010 5:11 pm
by dtom29
It will work....but subsonic will be quieter. You will still get the sonic crack with the 115/124
Re: SBR question
Posted: Sun Oct 24, 2010 11:44 am
by 8th SPS USAF
29,
Thank you.
8th