Thx for moderating this forum on your suppressors.
Will you be releasing a tri lock mount for the Obsidian45?
How about metric LH pistons for the HK tactical pistols?
In 1/2x28?
Finally a 9mm end cap ?
Thx and congratulations on your new company.
Accessories for Obsidian 45
Moderator: Henry Graham
-
- Elite Member
- Posts: 271
- Joined: Mon Nov 28, 2005 8:08 pm
- Location: Target Rich Environment, South Florida
Accessories for Obsidian 45
Regards,
Jorge
Jorge
- Fulliautomatix
- Silent But Deadly
- Posts: 253
- Joined: Sun Sep 18, 2011 7:46 pm
Re: Accessories for Obsidian 45
The Obsidian can use SilencerCo Osprey/Octane pistons, so you are pretty well set for all your needs.
viewtopic.php?f=2&t=135996
viewtopic.php?f=2&t=135996
Speak softly, and carry a big stick.
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Accessories for Obsidian 45
Fixed thread adapters too?
Would be a perfect can if able be used with supersonic 300 BLK!
Would be a perfect can if able be used with supersonic 300 BLK!
Re: Accessories for Obsidian 45
Anyone have a lead on these? I need a piston for my HK45c and would rather have a Rugged one than a Silencerco if they'll be available soon. I thought they would be out before the Obsidian started making its way into the wild
- Fulliautomatix
- Silent But Deadly
- Posts: 253
- Joined: Sun Sep 18, 2011 7:46 pm
Re: Accessories for Obsidian 45
As a matter of fact, yes, I have a SilencerCo 5/8"-24 direct thread fixed mount for Octane 45, and it worked fine with the Rugged Obsidian.eastern_hunter wrote:Fixed thread adapters too?
Would be a perfect can if able be used with supersonic 300 BLK!
This part: https://www.store.silencerco.com/collec ... =221764050
Speak softly, and carry a big stick.
Re: Accessories for Obsidian 45
Anyone know if the Octane 9 can take the Obsidian 3 lug?
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
- BadKarmaZeroSix
- Silent Operator
- Posts: 54
- Joined: Mon Jan 12, 2015 4:48 pm
- Location: NW Missouri
Re: Accessories for Obsidian 45
What about using the pistons and SPACER from SiCo on the Obsidian? Would rather not use the fixed MOUNT because wanna keep the piston grooves from gettin fouled more than necessary...anybody try this yet, or confirm with Rugged?
It's always the quiet guy in the room...with a suppressor.
- AlabamaPaul
- Silent But Deadly
- Posts: 351
- Joined: Fri Oct 17, 2014 10:53 am
- Location: AL
Re: Accessories for Obsidian 45
Yes, SiCo will work.BadKarmaZeroSix wrote:What about using the pistons and SPACER from SiCo on the Obsidian? Would rather not use the fixed MOUNT because wanna keep the piston grooves from gettin fouled more than necessary...anybody try this yet, or confirm with Rugged?
- Fulliautomatix
- Silent But Deadly
- Posts: 253
- Joined: Sun Sep 18, 2011 7:46 pm
Re: Accessories for Obsidian 45
When you say "piston grooves" do you mean the 3 grooves on the piston? Or some grooves inside the can that the piston engages?BadKarmaZeroSix wrote:What about using the pistons and SPACER from SiCo on the Obsidian? Would rather not use the fixed MOUNT because wanna keep the piston grooves from gettin fouled more than necessary...anybody try this yet, or confirm with Rugged?
Speak softly, and carry a big stick.
- BadKarmaZeroSix
- Silent Operator
- Posts: 54
- Joined: Mon Jan 12, 2015 4:48 pm
- Location: NW Missouri
Re: Accessories for Obsidian 45
Meant the seating grooves inside the can where the piston engages.Fulliautomatix wrote:When you say "piston grooves" do you mean the 3 grooves on the piston? Or some grooves inside the can that the piston engages?BadKarmaZeroSix wrote:What about using the pistons and SPACER from SiCo on the Obsidian? Would rather not use the fixed MOUNT because wanna keep the piston grooves from gettin fouled more than necessary...anybody try this yet, or confirm with Rugged?
It's always the quiet guy in the room...with a suppressor.
- BadKarmaZeroSix
- Silent Operator
- Posts: 54
- Joined: Mon Jan 12, 2015 4:48 pm
- Location: NW Missouri
Re: Accessories for Obsidian 45
Thanks, just wanted to make sure!AlabamaPaul wrote:Yes, SiCo will work.BadKarmaZeroSix wrote:What about using the pistons and SPACER from SiCo on the Obsidian? Would rather not use the fixed MOUNT because wanna keep the piston grooves from gettin fouled more than necessary...anybody try this yet, or confirm with Rugged?
It's always the quiet guy in the room...with a suppressor.