SilencerTalk

Sound Suppressor Discussion
It is currently Fri Nov 28, 2014 12:00 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Video of Ron Dishop Silencers
PostPosted: Sun Feb 10, 2013 6:07 am 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
Hello everyone I have posted a video of my 22lr cans on a SW MP22 and on a SW M&P15-22 on YouTube .
At the begging of the video I said 22 suppers instead of 22 High velocity my bad.
Check it out and let me know what you think.
Thanks
Ron

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Last edited by Ron Dishop Silencers on Wed Mar 06, 2013 8:51 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Sun Feb 10, 2013 1:19 pm 
Offline
Industry Professional
User avatar

Joined: Sat Jan 07, 2006 9:19 pm
Posts: 10278
Location: North Carolina
Why are you not anodizing the tube and core?


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Sun Feb 10, 2013 4:52 pm 
Offline
Silent But Deadly
User avatar

Joined: Wed Sep 21, 2011 12:40 pm
Posts: 608
Location: Behind a Glock22
Bendersquint wrote:
Why are you not anodizing the tube and core?


Probably because they are $195 :roll:

_________________
Keep calm, and suppress on


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Sun Feb 10, 2013 7:44 pm 
Offline
Member

Joined: Fri Jan 18, 2013 10:59 am
Posts: 18
safety glasses not required?


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 10:49 am 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
Bendersquint wrote:
Why are you not anodizing the tube and core?


I don’t have the equipment to anodizing; I haven’t been able to locate anyone that does anodizing that has an FFL with a SOT.
I make only 22 lr suppressors some are manufactured using aluminum and some are stainless steel, the aluminum suppressors are sold with a onetime free baffle replacement.
As seen in the video my suppressors are just as quit or quilter than some of the high dollar suppressors on the market today , the next video will have a sound meter next to the business end of the suppressor.
I make a suppressor that does exactly what it is intended to do; quit the report down and be very affordable to the consumer.

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 10:53 am 
Offline
Silent But Deadly

Joined: Tue Apr 14, 2009 3:14 pm
Posts: 1776
Hard to beat huntertown arms if going after the cheap 22 market.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 12:01 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
66427vette wrote:
Hard to beat huntertown arms if going after the cheap 22 market.


Not after the market I only make 49 suppressors a year.
As for Huntertown Arms they do make a very good suppressor in fact I have their Kestrel 5.56 on my AR-15 / 5.56 cal full auto 7” barrel SBR truck gun.
Only bad thing I can say about Huntertown is that they only make a few different calibrators of suppressors, but the ones they make are very good , I am not saying this because I am a dealer for them I am also a dealer for YHM , AWS , X-Caliber and Gemtech .

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 12:03 pm 
Offline
Elite Member

Joined: Tue Jan 15, 2008 3:40 pm
Posts: 762
Location: Madison, AL
We can anodize stuff for you... we have the capability to do 1000s of cores a week. Can do quick turn around as well.

_________________
Silent Industries
FFL/SOT
Madison, AL
256-783-5309
"Not the biggest- Just the best!"
Proud AAC SWR Silencerco Stocking Dealer
In einer Welt der Kompromisse Einige Männer Dont.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 12:05 pm 
Offline
Silent But Deadly
User avatar

Joined: Wed Oct 26, 2011 1:26 pm
Posts: 240
I only believe a silencer manufacturer is legit when a dog is barking the background, but cool stuff.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 12:23 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
laxguy59 wrote:
I only believe a silencer manufacturer is legit when a dog is barking the background, but cool stuff.


My dog won’t let me take photos of her; I think she’s on Americas Most Wanted.
But I do test fire my suppressors at Obama targets ; does that count as being legit?

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 1:12 pm 
Offline
Silent But Deadly
User avatar

Joined: Wed Oct 26, 2011 1:26 pm
Posts: 240
Ron Dishop Silencers wrote:
laxguy59 wrote:
I only believe a silencer manufacturer is legit when a dog is barking the background, but cool stuff.


My dog won’t let me take photos of her; I think she’s on Americas Most Wanted.
But I do test fire my suppressors at Obama targets ; does that count as being legit?


Approved.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 1:19 pm 
Offline
Industry Professional
User avatar

Joined: Sat Jan 07, 2006 9:19 pm
Posts: 10278
Location: North Carolina
Ron Dishop Silencers wrote:
Bendersquint wrote:
Why are you not anodizing the tube and core?


I don’t have the equipment to anodizing; I haven’t been able to locate anyone that does anodizing that has an FFL with a SOT.


We do anodizing all the time have offered it quite a bit on this forum as well, and we are 07/02.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 1:20 pm 
Offline
Industry Professional
User avatar

Joined: Sat Jan 07, 2006 9:19 pm
Posts: 10278
Location: North Carolina
Ron Dishop Silencers wrote:
66427vette wrote:
Hard to beat huntertown arms if going after the cheap 22 market.


Not after the market I only make 49 suppressors a year.


Why do you make only 49 a year, seems like a very odd number?


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 4:10 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
Bendersquint wrote:
Ron Dishop Silencers wrote:
66427vette wrote:
Hard to beat huntertown arms if going after the cheap 22 market.


Not after the market I only make 49 suppressors a year.
Why do you make only 49 a year, seems like a very odd number?


There is a 11 percent Federal Firearms and Ammunition Excise Tax (FAET) on the 50th one onward, that why I only make 49 SBRs , SBSs and suppressors a year , I feel if big brother want money let them make their own and sell them or get a real job; I am tired of supporting Obama’s illegal’s.

Correction on the suppressors , while I was writing this replay I was on the phone with department of treasury and was informed that there was no tax on suppressors only on firearms and ammunition I was under the oppression that suppressors were taxable along with firearms and ammunition.

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 4:14 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
Bendersquint
I havent been on the site much in the last year I never knew you did anodizing shoot me a price my email is below

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Mon Feb 11, 2013 6:31 pm 
Offline
Silent But Deadly
User avatar

Joined: Mon Nov 10, 2008 4:53 pm
Posts: 750
.
. I am tired of supporting Obama’s illegal’s.

.
I hear ya, it pisses me off to. That .22lr can sounded great.

_________________
AAC Cyclone-BRANDED FOR LIFE MEMBER


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Tue Feb 12, 2013 2:30 am 
Offline
Silent But Deadly

Joined: Mon Jan 22, 2007 1:06 am
Posts: 162
Those sounded great.


Good luck


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Tue Feb 12, 2013 2:32 am 
Offline
Silent But Deadly

Joined: Sun May 29, 2005 12:37 am
Posts: 4227
Location: South Sioux City, NE
Your silencer video was loud enough to hurt my ears, so I turned down the volume control on my PC until it was quieter than any silencer I ever heard before. Quite amazing.

_________________
NFA shooters blow their load with only one pull of the trigger.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Tue Feb 12, 2013 4:36 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
David Hineline wrote:
Your silencer video was loud enough to hurt my ears, so I turned down the volume control on my PC until it was quieter than any silencer I ever heard before. Quite amazing.


Was it the voice ?
When I made it I had the camera up to my eye and was talking into the camera the next one I'll mount the camera on a tripod and stand 5-6 feet away and put a with a sound meter about a foot away from muzzel.

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Tue Feb 12, 2013 5:53 pm 
Offline
Silent But Deadly
User avatar

Joined: Wed Sep 21, 2011 12:40 pm
Posts: 608
Location: Behind a Glock22
Ron Dishop Silencers wrote:
David Hineline wrote:
Your silencer video was loud enough to hurt my ears, so I turned down the volume control on my PC until it was quieter than any silencer I ever heard before. Quite amazing.


Was it the voice ?
When I made it I had the camera up to my eye and was talking into the camera the next one I'll mount the camera on a tripod and stand 5-6 feet away and put a with a sound meter about a foot away from muzzel.


I would recommend using mil-std for sound testing for credibility around here

_________________
Keep calm, and suppress on


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Wed Mar 06, 2013 9:19 pm 
Offline
Silent Operator
User avatar

Joined: Sat Dec 17, 2011 8:45 pm
Posts: 72
Location: Dunnellon, Florida
Short note to say I have removed the video from you tube and that I will be replacing it with a better one as soon as I can.
Also I would like to say thanks to Matt for the priceless advice.

Ron

_________________
Ron Dishop Silencers
352-795-4511
Email: rondishopsilencers@yahoo.com
FFL / SOT


Last edited by Ron Dishop Silencers on Thu Mar 07, 2013 11:11 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Wed Mar 06, 2013 10:43 pm 
Offline
Silent But Deadly

Joined: Mon Mar 15, 2010 8:20 pm
Posts: 1826
Location: wyoming
laxguy59 wrote:
I only believe a silencer manufacturer is legit when a dog is barking the background, but cool stuff.


I want a can that does NOT make the dogs bark. My f1 does.


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Thu Mar 07, 2013 12:08 am 
Offline
Silent But Deadly

Joined: Mon Nov 03, 2008 3:48 pm
Posts: 1267
SRM wrote:
laxguy59 wrote:
I only believe a silencer manufacturer is legit when a dog is barking the background, but cool stuff.


I want a can that does NOT make the dogs bark. My f1 does.


They all make the dogs bark ask Brooks @ Thompson Machine.
Now if you want them to stop barking get a Hush Puppy :lol:


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Thu Mar 07, 2013 9:18 am 
Online
Silent But Deadly
User avatar

Joined: Thu Jan 01, 2009 1:02 am
Posts: 10281
Location: Houston-ish
SRM wrote:
...
I want a can that does NOT make the dogs bark. ...

Best bets.
Image
Image

_________________
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895


Top
 Profile  
 
 Post subject: Re: Video of Ron Dishop Silencers
PostPosted: Thu Mar 07, 2013 10:44 am 
Offline
Silent But Deadly

Joined: Mon Mar 29, 2010 11:37 pm
Posts: 2514
doubloon wrote:
SRM wrote:
...
I want a can that does NOT make the dogs bark. ...

Best bets.
Image
Image



Under the heading of '... as he steps out of his time machine' here is a fun informational
article of an oldie-but-goodie .22 air pistol: Pre-War ( WW II ) Webley Senior.
I also picked mine up in 1960's and for indoor practice it is 'Hollywood' quiet.
It actually balances like a .45.

<< http://www.pyramydair.com/blog/2005/09/ ... enior.html >>

In the UK there was a shooter who attached a Parker-Hale onto it. All you saw was the
slight smoke from the oil used to lubricate the massive piston.

p.s., for those who are ever fortunate enough to snag one in .22 you can use modern .22 pellets
if you drill .225 hole in a metal block to the depth of .9 the height of the pellet. Then a small grommet setting
punch in pushed in to expand the skirt. Tedious but much easier than the old days pouring lead to make
musket balls -- but missing the smell of black powder at the range. :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: black-sheep, doubloon, Google [Bot], IB Slingin, JohnnyO, L1A1Rocker, marcus99, mr fixit, NickAAC, seattlite, wmdaniel70 and 172 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 PhpBB Group