22 LR rimfire barrel extension specs. -Best way to attach?

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
User avatar
starlingstalker
Silent But Deadly
Posts: 304
Joined: Wed Dec 01, 2010 9:47 am
Location: Astrodome

22 LR rimfire barrel extension specs. -Best way to attach?

Post by starlingstalker »

My neighbor just got a Sig 552. Had to COOK the flash hider to get it off. Tighter than a lug nut on a 3/4 ton truck. So we have the Silencerco 1/2 x 28 TPI barrel extension to attach. I have the same extension on my Nylon 66. I'm partial to anti-seize but is it the best? Not a problem so far.My Ruger SR 22 REQUIRES removal of the barrel adapter to get the barrel out of the slide. Can't bolt that one down. Got to get it apart with out much to work with. Which would be better for the rifles or is it personal preference - blue loctite or anti-seize? For the Ruger? And to keep the cans snug, too?
Ideas? Suggestions? Expertise? :?
Thank You for Your consideration,
starlingstalker :D
Ban weapons, not firearms!
It may ONLY be a dollar but its STILL a Sux Tax!
Pssst, so let's change this infringing UNConstitutional Law!
Top
RJT
Silent But Deadly
Posts: 718
Joined: Wed Jul 31, 2013 3:42 pm
Location: SoTx

Re: 22 LR rimfire barrel extension specs. -Best way to attach?

Post by RJT »

I used blue on my Walther Colt clone. I would have preferred red, but you have to loosen it to pull the rear pin for cleaning. My Spectre 2 hasn't gotten "stuck", so it hasn't been an issue.
You keep using that word. I do not think it means what you think it means.
Top
Post Reply

Return to “Silencer Talk”