Help! I have my complete Kidd Build arriving at my FFL on July 5th and just come to realize I need an adapter for Kidd's threaded barrel. Does anyone know who has these in stock, I have run all the searches I can think of and also posted to Silencerco this morning but am having no luck finding one that is in stock. Any help, greatly appreciated!
Thanks guys,
Scott
1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
Moderators: mpallett, mr fixit, bakerjw, renegade
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
I'm not sure what you are looking for. I have a KIDD SBR and my Element and Spectre II both screw right on to the KIDD threaded barrel.
Bobo
Bobo
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
You dont need it imo.....I have one of those and the only reason is I have a gun with stupid long threads and even with a gemtech spacer it chews up the o ring in my sparrow. If the threads are the right length its no necessary imo.
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
Well, I wish that was correct. KIDD threads their barrels .475" 1/2x28, here is the reply from Silencerco, but with of course no suggestion on where to get a .075" spacer! I replied and asked if they could supply me with one, but haven't heard back yet.
Re: Silencerco.com Site Contact
Hide Details
From
Andrew Herbst
To
[email protected]
If the threaded portion of the barrel is longer than .400" which I am assuming thats what the .475" meant, you won't get a proper shoulder. You will either need a thin spacer or to modify the existing threads.
Thanks
Andrew Herbst
Customer Service
Re: Silencerco.com Site Contact
Hide Details
From
Andrew Herbst
To
[email protected]
If the threaded portion of the barrel is longer than .400" which I am assuming thats what the .475" meant, you won't get a proper shoulder. You will either need a thin spacer or to modify the existing threads.
Thanks
Andrew Herbst
Customer Service
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
Got a reply from Silencerco, OK to use hardware store washer!
Thanks for the input everyone
Re: Silencerco.com Site Contact
Hide Details
From
Andrew Herbst
To
Scott Preston
Scott,
If you can find a spacer that is .100" thick at your local hardware store that should take care of the issue. It is slightly thicker than you need but will leave plenty of threads exposed for mounting.
Thanks
Andrew Herbst
Customer Service
Thanks for the input everyone
Re: Silencerco.com Site Contact
Hide Details
From
Andrew Herbst
To
Scott Preston
Scott,
If you can find a spacer that is .100" thick at your local hardware store that should take care of the issue. It is slightly thicker than you need but will leave plenty of threads exposed for mounting.
Thanks
Andrew Herbst
Customer Service
- Liberty Suppressors
- Silent Operator
- Posts: 77
- Joined: Thu Oct 04, 2012 1:21 pm
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
If you are still looking we have some spacers in stock. Just give us a call on Monday. 706-661-6911
Justin
Liberty Suppressors
"You have the right to remain SILENT"
www.Libertycans.net
Liberty Suppressors
"You have the right to remain SILENT"
www.Libertycans.net
Re: 1/2X28 TO 1/2X28 WITH O-RING ENGAGEMENT&THREAD PROTECTOR
Thank you Justin!