Octane 9 Fixed Barrel Adapter Conversion
Moderators: mpallett, mr fixit, bakerjw, renegade
-
- Member
- Posts: 36
- Joined: Fri Jan 27, 2012 8:00 am
Octane 9 Fixed Barrel Adapter Conversion
I was wondering if anyone knows a way to convert their booster (Nielsen device) 1/2-28 adapter to allow it to work with a fixed barrel, I imagine it would entail taking out the spring and replacing it with a spacer, but my Octane 9 is still in purgatory and I haven't been able to see it in person yet to figure out how to do this. I ask because my 9mm glock is threaded 1/2-28 as is my Ruger 22/45 and MP 15-22, and I haven't been able to find the fixed barrel adapters for this can. Thanks for any help!
Re: Octane 9 Fixed Barrel Adapter Conversion
You mean this?
http://www.silencershop.com/shop/swr-fi ... r-octane-9
http://www.superiorsilence.com/collecti ... read-mount
Given the choice, using a fixed mount is better than using a piston/spacer combo.
http://www.silencershop.com/shop/swr-fi ... r-octane-9
http://www.superiorsilence.com/collecti ... read-mount
Given the choice, using a fixed mount is better than using a piston/spacer combo.
Re: Octane 9 Fixed Barrel Adapter Conversion
Yeah, definitely buy the fixed adapter online or just have you gun shop order it for you. As soon as you try to jerry rig something, you'll put a round through the side of the end cap and just wish you spent the $85 in the first place.
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Octane 9 Fixed Barrel Adapter Conversion
If that's true ... what can one do for threads like M16x1 LH as might be found on an HK UMP?
Re: Octane 9 Fixed Barrel Adapter Conversion
Get the fixed adapter from silencershop. It works.
Historian, email silencerco.
Historian, email silencerco.
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Octane 9 Fixed Barrel Adapter Conversion
That Sir ... is the point ... no fixed adapter available. Only the piston and a spacer.
Re: Octane 9 Fixed Barrel Adapter Conversion
Is there an option that TrosUSA makes to convert the thread pattern?
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: Octane 9 Fixed Barrel Adapter Conversion
While the fixed mount is the preferred method, a fixed barrel spacer and piston should give you no issues at all.
-
- Member
- Posts: 36
- Joined: Fri Jan 27, 2012 8:00 am
Re: Octane 9 Fixed Barrel Adapter Conversion
Awesome, thanks for the help all.