5/8-24 to 1/2-28 asapter

[emrisg]

Can anybody reccomend an adapter to use my tirant on my 300 whisper bolt gun.
The gun is threaded 5/8-24 and the pison for the can is 1/2-28. I have the fixed barrel spacer just no adapter.

Thanks

[whispershot]

The gun is threaded 5/8-24 and the pison for the can is 1/2-28.

Ideally you'd want to buy a piston that's 5/8-24, but AAC doesn't seem to make one. LINK:http://www.advanced-armament.com/Ti-RAN ... p_585.html

Here's a link to an adapter though: http://www.brownells.com/rifle-parts/ba ... 05317.aspx

[emrisg]

Thanks but I am going from 5/8-24 to 1/2-28 not 1/2-28 to 5/8-24.

I was told aac would not make a 5/8-24 piston. Does anybody make pistons for these cans besides AAC?

I agree that a new piston would be the best fix but I can not find one.

[rancilio]

http://www.thesilencerstore.com/index.p ... ucts_id=25

www.thesilencerstore.com John has a what you need I believe.

[emrisg]

Thanks. I assume Silencer Store is good to go?

[rancilio]

Here is another link with an easy to read list.

http://www.xcaliberfirearms.com/?page_id=92

[rancilio]

Thanks. I assume Silencer Store is good to go?

In all of my experiences with them, yes, super.

[emrisg]

thank you very much.

[Emilio]

Never needed one because I have a SWRs but sumk in this thread posts one ($40) and maybe ask Rim what he went with.

viewtopic.php?f=2&t=111596

[rimshaker]

Do you have a Tirant 9 or 45?

I actually recommend TROS adapters since they use higher grade steel (stainless 300 series). This is especially important when using the bigger adapters that go from larger to smaller threading.

They cost a little more at $65 each but it's worth it. Just shoot Mark an email and tell him what you need.

http://trosusa.com/

[emrisg]

Thanks. I sent him an email.