SWR 3 Lug Removal?

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, bakerjw, renegade

Post Reply
.300WinMag
Silent But Deadly
Posts: 166
Joined: Mon Jan 22, 2007 1:06 am

SWR 3 Lug Removal?

Post by .300WinMag » Thu Apr 03, 2014 1:47 pm

So my 3 Lug has a tendency to not want to unscrew from the suppressor (top ring with the 3 holes). Is there a tool I was supposed to get to remove this? Do folks have good tips to remove it (aside from jamming a punch in it and forcing it to turn?)



TIA

jt526
Silent But Deadly
Posts: 571
Joined: Wed May 07, 2008 9:56 pm
Location: Dallas, TX

Re: SWR 3 Lug Removal?

Post by jt526 » Thu Apr 03, 2014 3:09 pm

I vaguely recall using the pin on an ar tool when this happened to me, or an ar stock wrench. Been a while since I had my three lug come apart. The end of my armorers tool I'm pretty sure worked fine on it. Will double check, about time to lube the three lug anyway.

Image
Stupid, stupid NFA items.

User avatar
kc_silencerco
Silent Operator
Posts: 59
Joined: Fri Feb 14, 2014 1:19 pm
Location: West Valley, UT
Contact:

Re: SWR 3 Lug Removal?

Post by kc_silencerco » Thu Apr 03, 2014 4:36 pm

You can use a strap wrench or the Armstrong Tools part #34-204
K.C. Hutchinson
Customer Service
SilencerCo
801.417.5384
[email protected]

Post Reply