Page 1 of 1
Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 11:32 am
by Tom3809
Hey Everybody,
So I am purchasing my first silencer and I am wondering if I could buy a can that could serve on my .223 AR, 45 1911, and 9mm Glock. I know that using a large bore silencer on a smaller caliber gun can cause the shot to be louder, but I have witnessed a comparison and could not tell the difference. Therefore I am wondering what silencer would best suit me.
I have been leaning towards getting an AAC can due to the 200$-off website promotion they have going on.
Any and all input would be greatly appreciated!
Re: Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 12:55 pm
by rimshaker
The Liberty Mystic is the most versatile for a first silencer. It's the only take-apart pistol can that also handles full power 223 and 300 BLK (at slow rates of fire). However you cannot shoot 40 and 45.
Re: Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 1:40 pm
by Dr.K
I imagine it's too much to ask of one single can, to be both .45acp, and .223 without major sacrifices on each caliber.
A .30 cal can would be a better option, as well as an independant .45acp can.
Re: Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 4:37 pm
by Emilio
Yes , no perfect can for all. Get the Octane 45 and save up for a 308 can. 223 is loud anyway.
Re: Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 7:22 pm
by chrismartin
Emilio wrote:Yes , no perfect can for all. Get the Octane 45 and save up for a 308 can. 223 is loud anyway.
This is the correct answer.
I'd also recommend getting a good 22lr silencer.
Re: Which suppressor for .223, 45, and 9mm?
Posted: Sat May 10, 2014 7:37 pm
by Historian
Tom3809 wrote:Hey Everybody,
So I am purchasing my first silencer and I am wondering if I could buy a can that could serve on my .223 AR, 45 1911, and 9mm Glock. I know that using a large bore silencer on a smaller caliber gun can cause the shot to be louder, but I have witnessed a comparison and could not tell the difference. Therefore I am wondering what silencer would best suit me.
I have been leaning towards getting an AAC can due to the 200$-off website promotion they have going on.
Any and all input would be greatly appreciated!
In other countries where suppressor designs are not regulated some
very old failed obscure designs had 'iris' baffles ... for each calibre from .45 => .22.
in a .45 can to accomodate/substitute various baffle hole diameters.
Metaphor: <<
http://upload.wikimedia.org/wikipedia/c ... s-iris.jpg >>
"No size fits all"
Re: Which suppressor for .223, 45, and 9mm?
Posted: Fri May 16, 2014 3:40 pm
by Liberty Suppress
Our Miranda for the 45 and Mystic for the others...
Tim @ Liberty
