Glock 26 host

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
paper9
Silent But Deadly
Posts: 225
Joined: Sat Feb 23, 2013 9:29 pm

Glock 26 host

Post by paper9 »

I tried the G26 with a Lonewolf threaded barrel, it does not cycle with a Infiniti attached.
It cycles far enough to reset the trigger, but the spent brass stays put in the chamber.
147 gr handload, Accurate 7, 6.0 grains.
Any ideas, suggestions? Thanks.
rimshaker
Silent But Deadly
Posts: 1038
Joined: Mon Jul 23, 2012 10:15 am
Location: FL

Re: Glock 26 host

Post by rimshaker »

A factory threaded G19 barrel works perfectly fine in a G26. But with that extra inch hanging out.

Try some new factory ammo also to see if it behaves the same.
Stout
Silent But Deadly
Posts: 176
Joined: Mon Oct 19, 2009 7:19 am
Location: Helotes, TX

Re: Glock 26 host

Post by Stout »

paper9 wrote:I tried the G26 with a Lonewolf threaded barrel, it does not cycle with a Infiniti attached.
It cycles far enough to reset the trigger, but the spent brass stays put in the chamber.
147 gr handload, Accurate 7, 6.0 grains.
Any ideas, suggestions? Thanks.
Accurate 7 is a slower burning powder. I run 3.6gr of Titegroup and the 147gr Montana bullets. My G26 cycles fine with the Trident. I think it's the Lone Wolf barrel also.
User avatar
Prince Yamato
Silent But Deadly
Posts: 192
Joined: Thu Jan 15, 2009 12:55 am

Re: Glock 26 host

Post by Prince Yamato »

I'm running mine with a factory extended and threaded barrel and it runs everything. I shoot both an AAC Eco–9 and a ti rant 9s on it. It would fire and cycle a subsonic primed turd. Does your can have a booster?
User avatar
mpallett
Elite Industry Professional
Posts: 2876
Joined: Mon Apr 25, 2005 9:28 am
Location: MA
Contact:

Re: Glock 26 host

Post by mpallett »

paper9 wrote:I tried the G26 with a Lonewolf threaded barrel, it does not cycle with a Infiniti attached.
It cycles far enough to reset the trigger, but the spent brass stays put in the chamber.
147 gr handload, Accurate 7, 6.0 grains.
Any ideas, suggestions? Thanks.

Put at least 200 rounds through the G26/ Lonewolf barrel with out the can attached and then try it.
Over weight Telco guy with a FFL/07 for hire :)
paper9
Silent But Deadly
Posts: 225
Joined: Sat Feb 23, 2013 9:29 pm

Re: Glock 26 host

Post by paper9 »

Yes, it has a recoil booster and I am working on the 200 rounds, I had the same thought.
paper9
Silent But Deadly
Posts: 225
Joined: Sat Feb 23, 2013 9:29 pm

Re: Glock 26 host

Post by paper9 »

Well, over 100 rounds and it cycles the G26 with the Lonewolf. Loads are VV N320, 3.8 grains, 147 gr, round nose, Osprey 9 on the end of the Lonewolf.
User avatar
mpallett
Elite Industry Professional
Posts: 2876
Joined: Mon Apr 25, 2005 9:28 am
Location: MA
Contact:

Re: Glock 26 host

Post by mpallett »

paper9 wrote:Well, over 100 rounds and it cycles the G26 with the Lonewolf. Loads are VV N320, 3.8 grains, 147 gr, round nose, Osprey 9 on the end of the Lonewolf.
Are the hot loads? The numbers I've seen for N320 are 3.6 - 3.7 and it is a +P loading.
Over weight Telco guy with a FFL/07 for hire :)
Post Reply