Anyone know a source?
Thanks
Eseatom
5/8x24 to 1/2x28 tip adapters
Moderators: mpallett, mr fixit, bakerjw, renegade
-
- Silent But Deadly
- Posts: 272
- Joined: Sun Mar 19, 2006 4:26 am
- Location: East of the Mississippi
5/8x24 to 1/2x28 tip adapters
From the Foothills of the Great Smoky Mountains
Re: 5/8x24 to 1/2x28 tip adapters
Do you say it backwards or are you trying to use a 22 cal device on a 30 cal host? There are lots of great 1/2x28 to 5/8x24 out there. I have a halcyon defense ordered from SS right now and it was cheap.
-
- Silent But Deadly
- Posts: 272
- Joined: Sun Mar 19, 2006 4:26 am
- Location: East of the Mississippi
Re: 5/8x24 to 1/2x28 tip adapters
I was looking for a way to attach a 1/2x28 threaded can to the larger threads of a 300 Blackout.
From the Foothills of the Great Smoky Mountains
Re: 5/8x24 to 1/2x28 tip adapters
What brand/model suppressor? Need to know so I can see if it has the chance of running a .30 bullet without risk of strike.
Re: 5/8x24 to 1/2x28 tip adapters
viewtopic.php?t=73665
This guy had some made but you'll have to talk to him about one. It's been a while.
https://www.tornado-technologies.com/cg ... 8-0.625X24
Found this online. Never dealt with them but price point is nice.
This guy had some made but you'll have to talk to him about one. It's been a while.
https://www.tornado-technologies.com/cg ... 8-0.625X24
Found this online. Never dealt with them but price point is nice.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: 5/8x24 to 1/2x28 tip adapters
We actually make a 5/8-24 fixed barrel mount for the Evo9's for this very purpose.eseaton wrote:AACEvo-9
No messing with adapters or stacked tolerances, just insert the FBM and go about your blasting.
-
- Silent But Deadly
- Posts: 272
- Joined: Sun Mar 19, 2006 4:26 am
- Location: East of the Mississippi
Re: 5/8x24 to 1/2x28 tip adapters
Bendersquint wrote:We actually make a 5/8-24 fixed barrel mount for the Evo9's for this very purpose.eseaton wrote:AACEvo-9
No messing with adapters or stacked tolerances, just insert the FBM and go about your blasting.
Sounds good. Cost?
From the Foothills of the Great Smoky Mountains
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: 5/8x24 to 1/2x28 tip adapters
PM sent a few days ago.eseaton wrote:Bendersquint wrote:We actually make a 5/8-24 fixed barrel mount for the Evo9's for this very purpose.eseaton wrote:AACEvo-9
No messing with adapters or stacked tolerances, just insert the FBM and go about your blasting.
Sounds good. Cost?
-
- Member
- Posts: 15
- Joined: Tue Oct 12, 2010 1:57 pm
Re: 5/8x24 to 1/2x28 tip adapters
Can you please let me know how to get one of these? I've been trying to contact your company via phone/voicemail and e-mail for a week and a half with no response. Thank you!Bendersquint wrote:We actually make a 5/8-24 fixed barrel mount for the Evo9's for this very purpose.eseaton wrote:AACEvo-9
No messing with adapters or stacked tolerances, just insert the FBM and go about your blasting.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: 5/8x24 to 1/2x28 tip adapters
Sending you an email now.Bullseye_Josh wrote:Can you please let me know how to get one of these? I've been trying to contact your company via phone/voicemail and e-mail for a week and a half with no response. Thank you!Bendersquint wrote:We actually make a 5/8-24 fixed barrel mount for the Evo9's for this very purpose.eseaton wrote:AACEvo-9
No messing with adapters or stacked tolerances, just insert the FBM and go about your blasting.
-
- Member
- Posts: 15
- Joined: Tue Oct 12, 2010 1:57 pm
Re: 5/8x24 to 1/2x28 tip adapters
I've not seen anything come through. Please use josh.vibert (at) gmail. Not sure what account may be in my profile here. The gmail account is what I used to email your sales@ address as well.
Thanks again,
Josh
Thanks again,
Josh
Re: 5/8x24 to 1/2x28 tip adapters
http://www.cncwarrior.com/category-s/1960.htm
I picked one of these up for $19 shipped. Should get it tomorrow in the mail.
They have a lot of thread adapters and muzzle devices. Most look a little wild, but the adapters should be good to go. They are checked for consentricity.
I picked one of these up for $19 shipped. Should get it tomorrow in the mail.
They have a lot of thread adapters and muzzle devices. Most look a little wild, but the adapters should be good to go. They are checked for consentricity.
-
- Member
- Posts: 15
- Joined: Tue Oct 12, 2010 1:57 pm
Re: 5/8x24 to 1/2x28 tip adapters
Got a call this evening with lots of great info from SRI, thanks!Bendersquint wrote:
Sending you an email now.
Re: 5/8x24 to 1/2x28 tip adapters
May adapter came in I attached it looked down the barrel with the can on it looks good to go.MattMan wrote:http://www.cncwarrior.com/category-s/1960.htm
I picked one of these up for $19 shipped. Should get it tomorrow in the mail.
They have a lot of thread adapters and muzzle devices. Most look a little wild, but the adapters should be good to go. They are checked for consentricity.