Need Adapter for 1/2" x 36 to 1/2" x 28

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
Magicman_007
Member
Posts: 15
Joined: Wed May 15, 2013 10:44 pm

Need Adapter for 1/2" x 36 to 1/2" x 28

Post by Magicman_007 »

I have a Colt 6450 (9mm AR) and come to find out that it is threaded 1/2" x 36. My Mystic is threaded 1/2" x 28 (Damn!), so I think I need an adapter of some sort unless someone here has another solution.

Does anyone make such an animal? Any suggestions? Thanks in advance!
Magicman_007
Member
Posts: 15
Joined: Wed May 15, 2013 10:44 pm

Re: Need Adapter for 1/2" x 36 to 1/2" x 28

Post by Magicman_007 »

Thanks so much. Matt contacted me and said they were doing a direct mount for this. I will wait and hear back from him first and I think this will be a back up. Again, appreciate the help!
User avatar
MattMan
Member
Posts: 19
Joined: Sun Dec 28, 2014 5:12 am
Location: South Carolina

Re: Need Adapter for 1/2" x 36 to 1/2" x 28

Post by MattMan »

Tros makes quality adapters also. Good luck.
BigWonton
Member
Posts: 41
Joined: Sun Jan 27, 2013 8:39 pm
Location: NE Ohio

Re: Need Adapter for 1/2" x 36 to 1/2" x 28

Post by BigWonton »

If it's unused, maybe Liberty might swap it out for you.

Otherwise just buy the 1/2x36 fixed mount over messing with adapters.
Magicman_007
Member
Posts: 15
Joined: Wed May 15, 2013 10:44 pm

Re: Need Adapter for 1/2" x 36 to 1/2" x 28

Post by Magicman_007 »

BigWonton wrote:If it's unused, maybe Liberty might swap it out for you.

Otherwise just buy the 1/2x36 fixed mount over messing with adapters.
To show you how smart I am, I did not realize Liberty made one. I was waiting to hear back from Matt on cost and lead time for his, but I may just order one directly. Thanks so much!
Post Reply