I don't know why this is so hard to find, but I am looking for a FACTORY Ruger 10/22 barrel with these specs:
16.5”
1:16 twist
standard tapered profile
1/2 x 28 threaded barrel
no sights cutouts
This must be OEM Ruger, not after-market.
I tried buying through Ruger, but they will only sell it as a factory installed part and they want a ridiculous amount to install it. I tried through Clark Custom Guns as they sometimes have take-offs but no luck.
This has been an extremely frustrating search... Any help would be greatly appreciated!
Please help me find a 10/22 barrel
Moderators: mpallett, mr fixit, bakerjw, renegade
- whiterussian1974
- Silent But Deadly
- Posts: 2857
- Joined: Sat Sep 28, 2013 11:37 pm
- Location: On 8th line of eye chart.
Re: Please help me find a 10/22 barrel
I went through the same thing. Ended up just buying a 10/22 Tactical w 1/2x28 threaded muzzle.
Ruger Factory isn't easy to work w. Otherwise you'll need to find the bbl on an auction site where someone bought an aftermarket barrel and no longer needs the original. But if they bought a threaded barrel, why would they sell it?
And they are so popular that if someone sells it, it's usually to a friend. Cheaper than over Net and shipping costs.
Ruger Factory isn't easy to work w. Otherwise you'll need to find the bbl on an auction site where someone bought an aftermarket barrel and no longer needs the original. But if they bought a threaded barrel, why would they sell it?
And they are so popular that if someone sells it, it's usually to a friend. Cheaper than over Net and shipping costs.
The Darkest Corners of Hell are reserved for those who remain Neutral!-Dante
The Death of One is a Tragedy, a million only a statistic.-Stalin
silencertalk.com/forum/viewtopic.php?f=10&t=135314
The Death of One is a Tragedy, a million only a statistic.-Stalin
silencertalk.com/forum/viewtopic.php?f=10&t=135314
-
- Silent But Deadly
- Posts: 185
- Joined: Fri Nov 22, 2013 11:45 am
- Location: Too close to Denver
Re: Please help me find a 10/22 barrel
I'd go haunt rimfirecentral.com, mad 10/22 parts over there, I've seen 2 LVT barrel/stock combos go for $100 each. One went into my safe. Lots of people out there don't understand how good the factory barrels are, so they swap em out on day one, unfired.
Proper grammar is awesome.
-
- Silent But Deadly
- Posts: 185
- Joined: Mon Jul 07, 2008 6:12 pm
Re: Please help me find a 10/22 barrel
I wanted the same thing and all there is is the Youth model bbl, same experience with Ruger. I bought an 18 1/2" and had Que over at Rimfire central cut it back and reeinstall the sight. He does beautiful work.
-
- Member
- Posts: 49
- Joined: Thu Feb 12, 2015 10:12 am
Re: Please help me find a 10/22 barrel
You can usually find them on ebay for around $125. Most of them are barrels that were removed for after market barrels
Re: Please help me find a 10/22 barrel
http://www.ebay.com/itm/RUGER-10-22-22- ... 116wt_1362
http://www.ebay.com/itm/Ruger-10-22-Thr ... _40wt_1362
http://www.ebay.com/itm/Ruger-10-22-Thr ... _40wt_1362
You keep using that word. I do not think it means what you think it means.
- Killerapplesauce
- Senior Silent Operator
- Posts: 124
- Joined: Thu Oct 30, 2014 9:25 pm
Re: Please help me find a 10/22 barrel
http://www.eabco.com/Ruger1022Barrels01.html has a good selection of threaded barrels for the 10/22.
Re: Please help me find a 10/22 barrel
Can you expound on the need for factory barrel? From the outside it seems an odd requirement since better barrels are available that match all your other specs.
[b]Quis custodiet ipsos custodes?[/b]
Re: Please help me find a 10/22 barrel
I've been checking them out daily for weeks, but will keep it up!ThaDoubleJ wrote:I'd go haunt rimfirecentral.com, mad 10/22 parts over there, I've seen 2 LVT barrel/stock combos go for $100 each. One went into my safe. Lots of people out there don't understand how good the factory barrels are, so they swap em out on day one, unfired.
Re: Please help me find a 10/22 barrel
Unfortunately these are used and I have had bad luck with used parts before, so these are off the list...
I found some "new" barrels on eBay, but they are a mix of lies and modifications. People either chop and thread a longer barrel or sell fakes.
Re: Please help me find a 10/22 barrel
Thanks, but looking for factory Ruger...Killerapplesauce wrote:http://www.eabco.com/Ruger1022Barrels01.html has a good selection of threaded barrels for the 10/22.
Re: Please help me find a 10/22 barrel
It's for a project I am undertaking with my son. I am sure there are better options than the standard factory offerings, but we are trying to stay all original.Conqueror wrote:Can you expound on the need for factory barrel? From the outside it seems an odd requirement since better barrels are available that match all your other specs.
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Please help me find a 10/22 barrel
16"
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 2ed0f9c714
17.5" but,
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 9e77b7259#
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 2ed0f9c714
17.5" but,
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 9e77b7259#
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Re: Please help me find a 10/22 barrel
Seller's response when I asked if these are factory barrels:T-Rex wrote:16"
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 2ed0f9c714
17.5" but,
http://www.ebay.com/itm/NEW-Ruger-10-22 ... 9e77b7259#
Our gunsmith made the threads on a new Ruger factory barrel. We have sold
hundreds of these with pretty good feedback. Thanks
-sport_r_us
Personally, I avoid ebay for pretty much anything because of shady sellers like this...
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Please help me find a 10/22 barrel
Did you email Clark Custom Guns?
They have a bunch of new and used Ruger items
They have a bunch of new and used Ruger items
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Re: Please help me find a 10/22 barrel
Hey Dan. I have a barrel that you are more than welcome to. PM me if you are interested.
- Killerapplesauce
- Senior Silent Operator
- Posts: 124
- Joined: Thu Oct 30, 2014 9:25 pm
Re: Please help me find a 10/22 barrel
If woolees barrel doesn't work out for you mite want to check out ADCO the can thread and relocate front sight for a $120.00 and they do top notch work.woolee wrote:Hey Dan. I have a barrel that you are more than welcome to. PM me if you are interested.
https://www.adcofirearms.com/shopservic ... 0Threading
Re: Please help me find a 10/22 barrel
He said he tried Clark but no luck.T-Rex wrote:Did you email Clark Custom Guns?
They have a bunch of new and used Ruger items
It might be because he is looking specifically for a factory 16.5" threaded barrel. Not everybody throws away the factory threaded barrel. Clark usually has plenty of barrels but most people buy the cheapest 10/22 they can find and the 16.5" threaded barrel models are usually not the cheapest 10/22 on the shelf.
Probably the best course of action would be to tell Clark you want to buy one of the take off barrels chopped to 16.5" and threaded.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: Please help me find a 10/22 barrel
If you want a factory barrel best thing to do is just have the one you have modified to what you want, try "Jp Grips & Machine".
".
".
Re: Please help me find a 10/22 barrel
Thanks for all the help guys... I ended up with an E.R. Shaw...
Re: Please help me find a 10/22 barrel
Snazzy.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895