Does anyone make a threaded barrels for the M&P 9 compact?
Can you thread a 9mm fullsize and drop it in to the compact?
Threaded barrel for M&P9c
Moderators: mpallett, mr fixit, bakerjw, renegade
-
- Silent Operator
- Posts: 70
- Joined: Sat Jan 24, 2015 9:28 am
-
- Silent Operator
- Posts: 89
- Joined: Tue Mar 04, 2014 11:26 am
Re: Threaded barrel for M&P9c
Adco can add an extension and threaded it for you. It isn't cheap - cost $155. I don't know if a full sized M&P barrel will fit in a compact, but if it does it will be cheaper for them to cut and thread that barrel to your desired length (not including the price of the new barrel of course).
Re: Threaded barrel for M&P9c
I've got both; if I remember I'll try the full-size barrel in the compact tonight and see if it fits/works.
-
- Silent Operator
- Posts: 70
- Joined: Sat Jan 24, 2015 9:28 am
Re: Threaded barrel for M&P9c
Ya, I've seen. $219 and backordered with no estimation or like $245 from SL directly.
A $90 M&P barrel and a $50 thread job would be preferable though.
- Michael Black 47
- Silent But Deadly
- Posts: 164
- Joined: Mon Dec 01, 2014 10:57 pm
- Location: PA
Re: Threaded barrel for M&P9c
Bradpierson26 wrote:Ya, I've seen. $219 and backordered with no estimation or like $245 from SL directly.
A $90 M&P barrel and a $50 thread job would be preferable though.
http://palmettostatearmory.com/index.ph ... 01t-t.html
http://www.brownells.com/handgun-parts/ ... 40297.aspx
I hope this helps. I am very satisfied with both of my barrels from storm lake. One for my xd 45 tactical and the other for the m&p compact 9
Re: Threaded barrel for M&P9c
I believe that a FS barrel WILL fit into a C, but the OD of the barrel ramps up at the end, so that the barrel fits tighter inside the slide. That ramp-up in thickness occurs after the slide opening on the C, so you accuracy may suffer. Also, the weight of a can hanging off the end of the barrel may cause lock-up issues if there's too much play? Just a guess.
Jeff
Jeff
- doubleajaybrock
- Silent But Deadly
- Posts: 181
- Joined: Sat Oct 11, 2008 9:03 am
- Location: Colorado
Re: Threaded barrel for M&P9c
-Form 1 SBR AR
-AAC Ti-rant 45
-Silencerco 22 Sparrow
-AAC 762 SDN-6
-AAC Ti-rant 45
-Silencerco 22 Sparrow
-AAC 762 SDN-6