Threaded barrel for M&P9c

[Bradpierson26]

Does anyone make a threaded barrels for the M&P 9 compact?
Can you thread a 9mm fullsize and drop it in to the compact?

[savagetactical]

Adco can add an extension and threaded it for you. It isn't cheap - cost $155. I don't know if a full sized M&P barrel will fit in a compact, but if it does it will be cheaper for them to cut and thread that barrel to your desired length (not including the price of the new barrel of course).

[sillycon]

I've got both; if I remember I'll try the full-size barrel in the compact tonight and see if it fits/works.

[JeffWard]

http://www.midwayusa.com/product/218546 ... -protector

Storm Lake makes 'em

[Bradpierson26]

http://www.midwayusa.com/product/218546 ... -protector

Storm Lake makes 'em

Ya, I've seen. $219 and backordered with no estimation or like $245 from SL directly.
A $90 M&P barrel and a $50 thread job would be preferable though.

[Michael Black 47]

http://www.midwayusa.com/product/218546 ... -protector

Storm Lake makes 'em

Ya, I've seen. $219 and backordered with no estimation or like $245 from SL directly.
A $90 M&P barrel and a $50 thread job would be preferable though.

http://palmettostatearmory.com/index.ph ... 01t-t.html

http://www.brownells.com/handgun-parts/ ... 40297.aspx

I hope this helps. I am very satisfied with both of my barrels from storm lake. One for my xd 45 tactical and the other for the m&p compact 9

[JeffWard]

I believe that a FS barrel WILL fit into a C, but the OD of the barrel ramps up at the end, so that the barrel fits tighter inside the slide. That ramp-up in thickness occurs after the slide opening on the C, so you accuracy may suffer. Also, the weight of a can hanging off the end of the barrel may cause lock-up issues if there's too much play? Just a guess.

Jeff

[doubleajaybrock]

KKM Precision

http://www.kkmprecision.com/shopping-ca ... cat&cat=MP