AeroPrecision Dedicated Suppressed 300 Blackout Upper

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, bakerjw, renegade

Post Reply
User avatar
Killerapplesauce
Senior Silent Operator
Posts: 124
Joined: Thu Oct 30, 2014 10:25 pm

AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by Killerapplesauce » Tue Jun 23, 2015 6:16 pm

Just received a product announcement from Aero Precision Looks pretty cool.

http://aeroprecisionusa.com/m4e1-sd.html

User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by JeffWard » Wed Jun 24, 2015 6:26 am

This is basically my build... with my Omega coming next month.

Mine is 8", with a 9.75" YHM rail. Can't wait...

JW

User avatar
MJF1911
Silent But Deadly
Posts: 523
Joined: Tue Sep 27, 2011 12:40 am
Location: Montana Territory

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by MJF1911 » Fri Jun 26, 2015 2:18 am

I went 8" with a 13" ALG handguard, the Octane fits pretty well under there and looks good.
SWR 556 Specwar, 762 Specwar, Octane 45HD, Spectre II; SilencerCo Osprey 45, Omega; AAC Pilot, 300TM; Ruger AC556
Rugged Oculus; Dead Air Sandman K

paper9
Silent But Deadly
Posts: 225
Joined: Sat Feb 23, 2013 11:29 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by paper9 » Sat Jun 27, 2015 8:56 pm

Is this a two stamp set up?

User avatar
MJF1911
Silent But Deadly
Posts: 523
Joined: Tue Sep 27, 2011 12:40 am
Location: Montana Territory

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by MJF1911 » Sun Jun 28, 2015 12:38 am

If you put it on a rifle it is.
SWR 556 Specwar, 762 Specwar, Octane 45HD, Spectre II; SilencerCo Osprey 45, Omega; AAC Pilot, 300TM; Ruger AC556
Rugged Oculus; Dead Air Sandman K

dagamore
Member
Posts: 12
Joined: Fri Apr 25, 2008 10:13 am

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by dagamore » Sun Jun 28, 2015 5:29 pm

paper9 wrote:Is this a two stamp set up?

from the OP link.

Please Note
This is an NFA Item. Please contact your FFL/SOT and confirm they will accept this item before placing your order. The wait time for approval to transfer this item to an FFL/SOT dealer is 4 - 8 weeks. The wait time for Form 4 approval (FFL/SOT dealer transfer to customer) is 4 - 6 months.

This configuration is <16" in length and will require an additional tax stamp if being built in to an SBR.

User avatar
este
Silent But Deadly
Posts: 2235
Joined: Sun Aug 10, 2008 10:22 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by este » Mon Jun 29, 2015 12:12 pm

Wow, people still put suppressors inside of handguards huh? Cool....

User avatar
Emilio
Silent But Deadly
Posts: 2339
Joined: Thu Apr 07, 2011 10:38 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by Emilio » Mon Jun 29, 2015 12:41 pm

AP makes good stuff BUT that is pricey! With todays AR prices its much better to build your own or buy similar.
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!

User avatar
MJF1911
Silent But Deadly
Posts: 523
Joined: Tue Sep 27, 2011 12:40 am
Location: Montana Territory

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by MJF1911 » Mon Jun 29, 2015 10:54 pm

Emilio wrote:AP makes good stuff BUT that is pricey! With todays AR prices its much better to build your own or buy similar.
I think you would have a tough time beating that price. After $1100 for the Omega, that leaves you $450 for the upper. $150 for a barrel, $100 for a receiver, $100 for a handguard, $100 for a BCG. I was able to scout out some sales and put mine together for about that much or a little more.
SWR 556 Specwar, 762 Specwar, Octane 45HD, Spectre II; SilencerCo Osprey 45, Omega; AAC Pilot, 300TM; Ruger AC556
Rugged Oculus; Dead Air Sandman K

User avatar
Emilio
Silent But Deadly
Posts: 2339
Joined: Thu Apr 07, 2011 10:38 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by Emilio » Mon Jun 29, 2015 11:27 pm

MJF1911 wrote:
Emilio wrote:AP makes good stuff BUT that is pricey! With todays AR prices its much better to build your own or buy similar.
I think you would have a tough time beating that price. After $1100 for the Omega, that leaves you $450 for the upper. $150 for a barrel, $100 for a receiver, $100 for a handguard, $100 for a BCG. I was able to scout out some sales and put mine together for about that much or a little more.
The Omega is $880 http://www.silencershop.com/silencers/7 ... -7-62.html , Anderson lower $39 HF barrel's and good upper, NB or NT bolt also cheap right now and all mill spec quality stuff. then spend the extra on a good TG or optic. :mrgreen:

Just trying to help, I build tons of AR's and keep up on prices for such. :|

BTW, I have one of the first lowers Aero ever bult. :mrgreen:
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!

User avatar
Killerapplesauce
Senior Silent Operator
Posts: 124
Joined: Thu Oct 30, 2014 10:25 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by Killerapplesauce » Wed Jul 01, 2015 9:52 am

Agree with you Emilio a little pricey but still cool :) more for the people that don't feel comfortable building their own uppers. I bought a few of there stripped upper receivers, and the fit very snug on my Noveske lowers i lucked out on getting no wobble at all been hooked since.

User avatar
JasonM
Silent But Deadly
Posts: 1483
Joined: Sat Jul 16, 2011 3:51 pm
Location: NoVA
Contact:

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by JasonM » Wed Jul 01, 2015 11:16 am

este wrote:Wow, people still put suppressors inside of handguards huh? Cool....
lol. and yes, it looks killer in social media posts.
Kick Ass Design
ten:pm media
www.facebook.com/VisualGravy

ncorry
Silent But Deadly
Posts: 182
Joined: Fri Jan 02, 2009 1:17 pm

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by ncorry » Wed Jul 01, 2015 2:47 pm

That's pretty close to what I have in my Liberty Leonidas.

User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

Re: AeroPrecision Dedicated Suppressed 300 Blackout Upper

Post by JeffWard » Thu Jul 02, 2015 10:43 am

JeffWard wrote:This is basically my build... with my Omega coming next month.

Mine is 8", with a 9.75" YHM rail. Can't wait...

JW
My whole SBR (Upper, Lower, and Omega) was built (by me) for about $1700.

The Omega was $880 of that. My break was $200 alone, so if you subtract that, I'm closer to $1500.

Add $400 in tax stamps... I'm just under/at $2K.

Jeff

Post Reply