STAMP DAY!

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, bakerjw, renegade

Post Reply
User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

STAMP DAY!

Post by JeffWard » Wed Aug 12, 2015 5:50 am

Check cleared April 9th.
Stamp came yesterday, 8/11.

Tomorrow is load testing for my 300BLK SBR, and this weekend, it will run on my .308.

:D
JeffWard

OJB4
Silent But Deadly
Posts: 572
Joined: Sat Mar 03, 2012 7:10 pm
Location: South Louisiana
Contact:

Re: STAMP DAY!

Post by OJB4 » Wed Aug 12, 2015 2:44 pm

whoop whoop!!!!! I mailed a check for my Omega on 05/11/2015 so assuming it cleared shortly after I mailed it I should only be several more weeks away from approval!

Congrats and happy shooting!
I've gotta stop this habit.

User avatar
jdasilva
Silent But Deadly
Posts: 245
Joined: Thu Mar 07, 2013 3:02 am

Re: STAMP DAY!

Post by jdasilva » Wed Aug 12, 2015 11:51 pm

congrats! i sent my Octane 45 on 4/17

User avatar
Baboon
Silent But Deadly
Posts: 695
Joined: Wed Jun 18, 2008 3:03 pm
Location: Houston

Re: STAMP DAY!

Post by Baboon » Thu Aug 13, 2015 8:02 am

Dealer called in regards to a correction letter from NFA Branch-11 for my M203. Hopefully 2-3 weeks & I'll have my little friend!
Cry 'Havoc,' and let slip the dogs of war;
That this foul deed shall smell above the earth
With carrion men, groaning for burial.

BloodyThumb
New Member
Posts: 4
Joined: Fri Aug 14, 2015 1:53 pm

Re: STAMP DAY!

Post by BloodyThumb » Fri Aug 14, 2015 1:58 pm

Greetings to all.

New user. First post.

Long time shooter (35+ years).

First suppressor.

Dealer called today. Paperwork filed with dealer on 6/22 and stamp arrived today 8/14.

I am truly surprised. I expected another 2-3 months before it came back!

Range time tomorrow!

BT
Thanks,

BloodyThumb

NRA Endowment / LEO

Engraving on a handgun is like lace on a leather jacket! :roll:

User avatar
Baboon
Silent But Deadly
Posts: 695
Joined: Wed Jun 18, 2008 3:03 pm
Location: Houston

Re: STAMP DAY!

Post by Baboon » Fri Aug 14, 2015 5:01 pm

Enjoy it all you can. Be prepared to talk about it more then you shoot it, if your @ a range with others about!
Cry 'Havoc,' and let slip the dogs of war;
That this foul deed shall smell above the earth
With carrion men, groaning for burial.

User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

Re: STAMP DAY!

Post by JeffWard » Fri Aug 14, 2015 5:26 pm

Here's my Omega with the flat end-cap. 6" long and 12oz! 8.25" barrel, results in a 29" OAL including the can.

Image

Jeff

User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

Re: STAMP DAY!

Post by JeffWard » Fri Aug 14, 2015 6:32 pm

Here's some testing. This is in a covered bay, like a concrete/railroad tie hanger, so there is a lot of echo. But it's still "conversationally" quiet, and very comfortable without muffs.

Image

JW

OJB4
Silent But Deadly
Posts: 572
Joined: Sat Mar 03, 2012 7:10 pm
Location: South Louisiana
Contact:

Re: STAMP DAY!

Post by OJB4 » Thu Sep 10, 2015 12:20 pm

BloodyThumb wrote:Greetings to all.

New user. First post.

Long time shooter (35+ years).

First suppressor.

Dealer called today. Paperwork filed with dealer on 6/22 and stamp arrived today 8/14.

I am truly surprised. I expected another 2-3 months before it came back!

Range time tomorrow!

BT
That is fast. I mailed a check to my dealer on 05/11 for my Omega and still haven't heard anything yet as of 09/10. Shouldn't be much more than 2-3 more weeks I'd think. Assuming everything went well with the paperwork and he didn't have to resubmit cause of an error. Hoping it's here in time to sight in the Savage .308 Hog Hunter and use it opening weekend of deer season!
I've gotta stop this habit.

Gotcha Too
New Member
Posts: 8
Joined: Sat Sep 26, 2015 2:18 am

Re: STAMP DAY!

Post by Gotcha Too » Tue Sep 29, 2015 11:46 am

Sent paperwork in yesterday 9/28/2015 now the wait begins. Took 6 months for my SBR getting a correction letter didn't help. Only thing wrong was I fat fingered my zip code by one number. Funny thing is I typed it 3 times to make sure everything was correct and legible, other two were correct. It was my first, very nervous. This time my dealer filled it out for the Omega. Still a little nervous. :roll:
Last edited by Gotcha Too on Fri Oct 02, 2015 7:24 am, edited 1 time in total.

Diver1215
New Member
Posts: 2
Joined: Sat May 23, 2015 2:40 pm

Re: STAMP DAY!

Post by Diver1215 » Wed Sep 30, 2015 4:21 pm

GMT Halo went pending on form 4 trust May 22nd.
Approved on Sept 12th.
I just picked it up yesterday.

cyclone72
Silencertalk Goon Squad
Posts: 7566
Joined: Mon Jun 26, 2006 12:16 pm
Location: Florida

Re: STAMP DAY!

Post by cyclone72 » Wed Sep 30, 2015 7:17 pm

JeffWard wrote:Here's my Omega with the flat end-cap. 6" long and 12oz! 8.25" barrel, results in a 29" OAL including the can.

Image

Jeff
Very cool!


When you applied for your sbr and had to list overall length did you measure it with the stock extended
or retracted?

User avatar
JeffWard
Silent But Deadly
Posts: 230
Joined: Sun Jan 04, 2015 1:42 pm
Contact:

Re: STAMP DAY!

Post by JeffWard » Thu Oct 01, 2015 5:28 am

cyclone72 wrote:
JeffWard wrote:Here's my Omega with the flat end-cap. 6" long and 12oz! 8.25" barrel, results in a 29" OAL including the can.

Image

Jeff
Very cool!

Retracted. Minimum length.



When you applied for your sbr and had to list overall length did you measure it with the stock extended
or retracted?

thecameraman79
Senior Silent Operator
Posts: 106
Joined: Mon Nov 25, 2013 10:21 am

Re: STAMP DAY!

Post by thecameraman79 » Thu Oct 01, 2015 7:50 am

it sounds counter productive but if you read the ATF paperwork (can't find it this second) they want the overall length with the stock extended. Makes no sense since you'd think they'd want to know the shortest it can be but the want the longest configuration.

https://www.guntrustlawyer.com/form1
part "4f"
cyclone72 wrote:
JeffWard wrote:Here's my Omega with the flat end-cap. 6" long and 12oz! 8.25" barrel, results in a 29" OAL including the can.

Image

Jeff
Very cool!


When you applied for your sbr and had to list overall length did you measure it with the stock extended
or retracted?

cyclone72
Silencertalk Goon Squad
Posts: 7566
Joined: Mon Jun 26, 2006 12:16 pm
Location: Florida

Re: STAMP DAY!

Post by cyclone72 » Thu Oct 01, 2015 5:18 pm

Cool,thanks.

hank jr
New Member
Posts: 9
Joined: Tue Mar 25, 2008 5:30 pm

Re: STAMP DAY!

Post by hank jr » Tue Oct 06, 2015 8:27 pm

Silencerco Octane 45HD on form 4 corp
Check cashed May 15 2015
Approved on Sept 14 2015
I picked it up today!

Added 1/2-28 piston and 9mm end cap.

Tanner
Member
Posts: 22
Joined: Sun Dec 21, 2014 5:06 am

Re: STAMP DAY!

Post by Tanner » Tue Oct 13, 2015 3:14 pm

Specwar 7.62 on trust

check cash on June 30
Approved Sept 30
Just picked it up today

Post Reply