This is the Curtis Tactical ST45CFP suppressor. This was designed with the same multi use in mind as the design of our ST9CFP. The rear threads are 5/8-32 for attachment on 458socom rifles, the booster assembly threads into the rear of the suppressor allowing use on any handgun 45cal and smaller. The suppressor has all 17-4 baffles and end caps. weight is 11.7oz without the booster and 14.8oz with the booster, length is 7" no booster and 8.5" with the booster, diameter is 1.375". Suppressor is $625 and booster assembly with one piston is $275.
Joe
Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Moderators: mpallett, mr fixit, bakerjw, renegade
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
-
- Silent Operator
- Posts: 58
- Joined: Tue Oct 14, 2014 3:00 pm
- Location: Louisiana the sticks
- Contact:
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
You sir can whip out some bad ass stuff i wouldn't hesitate to buy your cans if i was in the market for a new maybe one day ill own a peice of your artworks nice man
hey watch this
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Thank you, I appreciate the approval and kind words.sickasssig wrote:You sir can whip out some bad ass stuff i wouldn't hesitate to buy your cans if i was in the market for a new maybe one day ill own a peice of your artworks nice man
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Looking good, Joe!
Pete - The Firearm Blog
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Looks nice Joe! The dimples on the tube are a nice touch!
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Thanks! A lot of design went into these to keep them lightweight and still handle the 458socom. For its size it actually does a nice job even on full power super sonic 458.Bendersquint wrote:Looks nice Joe! The dimples on the tube are a nice touch!
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
-
- Member
- Posts: 22
- Joined: Thu Jul 14, 2016 9:11 pm
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Being only 1.375" what kind of suppression are you seeing ? Not a lot of volume.
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Given that it is for .45 ACP ~830 fps the variable is baffle design.Deserteaglexxx wrote:Being only 1.375" what kind of suppression are you seeing ? Not a lot of volume.
At the far end calibration point for .45, for example, an early
1970s OCONUS Armorer-made suppressor
had the dimensions of 1.5" x 8" with simple bronze washer baffles
and spacers.
No meters available but on a special bolt action rifle it was if memory serves as quiet
as some present day top of the line .22 cans- the often quoted " ... like a BB gun".
On an Gov. 1911A1 with a Bar-Sto it was hearing safe, especially in
a dense environ. No comparison was reported made with a Hush-Puppy
9mm.
Bet Curtis Tactical matches or exceeds that primitive design given
their superlative reputation.
Just a hoary anecdote for historical chuckles.
Last edited by Historian on Mon Sep 12, 2016 8:54 am, edited 1 time in total.
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
Its really not a volume issue with 45 it is more of an issue of how well you can strip the gas away from the bore and trap it. Volume makes up for poor design. The suppressor has one blast baffle and six k baffles. 458socom supers in 16" barrel meter 138-141db. and 230gr 45acp is 133db dry, 126db wet. We also build a 458 reflex suppressor that is 1.75"dia x 12" and reflexes 4" over the barrel if you want the 458 as quiet as it gets but there is something to be said for a 7" long suppressor that weighs under 12oz that will protect your hearing while hunting with a 45cal rifle.Deserteaglexxx wrote:Being only 1.375" what kind of suppression are you seeing ? Not a lot of volume.
Joe
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
-
- Senior Silent Operator
- Posts: 128
- Joined: Tue Apr 14, 2009 9:08 pm
- Location: NW Missouri
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
I can assure you that big Socom suppressor is a thing of beauty.curtistactical wrote:Its really not a volume issue with 45 it is more of an issue of how well you can strip the gas away from the bore and trap it. Volume makes up for poor design. The suppressor has one blast baffle and six k baffles. 458socom supers in 16" barrel meter 138-141db. and 230gr 45acp is 133db dry, 126db wet. We also build a 458 reflex suppressor that is 1.75"dia x 12" and reflexes 4" over the barrel if you want the 458 as quiet as it gets but there is something to be said for a 7" long suppressor that weighs under 12oz that will protect your hearing while hunting with a 45cal rifle.Deserteaglexxx wrote:Being only 1.375" what kind of suppression are you seeing ? Not a lot of volume.
Joe
I'll post a full report of function after it gets out of jail.
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical ST45CFP Multi Use Suppressors are ready to go.
I really look forward to your reviews of the big cans we done.ohnomrbillk wrote:I can assure you that big Socom suppressor is a thing of beauty.curtistactical wrote:Its really not a volume issue with 45 it is more of an issue of how well you can strip the gas away from the bore and trap it. Volume makes up for poor design. The suppressor has one blast baffle and six k baffles. 458socom supers in 16" barrel meter 138-141db. and 230gr 45acp is 133db dry, 126db wet. We also build a 458 reflex suppressor that is 1.75"dia x 12" and reflexes 4" over the barrel if you want the 458 as quiet as it gets but there is something to be said for a 7" long suppressor that weighs under 12oz that will protect your hearing while hunting with a 45cal rifle.Deserteaglexxx wrote:Being only 1.375" what kind of suppression are you seeing ? Not a lot of volume.
Joe
I'll post a full report of function after it gets out of jail.
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02