This is the non-ported version of the integrally suppressed CZ Scorpion, a ported version is also available to control velocity on 115gr ammo. Suppressor is 1.435" diameter x 11.5" long( overall barrel length with suppressor is 13"). Baffles and caps are 17-4ss, tube is 316L ss.
Joe
[email protected]
http://imgur.com/a/uqLFe
http://imgur.com/xD9TzUd
http://imgur.com/enY2qGI
http://imgur.com/cFMWqo6
Curtis Tactical integrally suppressed CZ Scorpion
Moderators: mpallett, mr fixit, bakerjw, renegade
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Curtis Tactical integrally suppressed CZ Scorpion
Last edited by curtistactical on Wed Aug 23, 2017 12:56 pm, edited 2 times in total.
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
You've been photobusted
I don't care what your chart says
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical integrally suppressed CZ Scorpion
I'm trying to figure out what is going on with photobucket lol.John A. wrote:You've been photobusted
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
You'll have to host the pictures somewhere else.
To save you the trouble, photobucket wants $400 a year to allow you to be able to embed/link images now.
I use imgur.com
To save you the trouble, photobucket wants $400 a year to allow you to be able to embed/link images now.
I use imgur.com
Last edited by John A. on Wed Aug 23, 2017 12:49 pm, edited 1 time in total.
I don't care what your chart says
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical integrally suppressed CZ Scorpion
Thanks! Going there now.John A. wrote:You'll have to host the pictures somewhere else.
To save you the trouble, photobucket wants $400 a year to allow you to be able to embed/link images now.
I use imgur.com
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
Joe, on the reddit pages in the links, if you right click on the image, then click "view image" or "open link in new tab" then you can copy the adress in the address bar up top and directly imbed the images here. they have to be cropped to 1600x1600 or smaller before you upload them to reddit though.
very neat integral, btw.
very neat integral, btw.
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical integrally suppressed CZ Scorpion
Its a good thing I'm better at building suppressors than posting photos.fishman wrote:Joe, on the reddit pages in the links, if you right click on the image, then click "view image" or "open link in new tab" then you can copy the adress in the address bar up top and directly imbed the images here. they have to be cropped to 1600x1600 or smaller before you upload them to reddit though.
very neat integral, btw.
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
I saw the photos.
Looks great.
I'll be honest, you should port the barrel, even with subs to make full use of that area, unless you're trying to use it as a reflex can.
From my experience, making six 9/64" ports in the barrel 2-1/2 inches from the chamber will retain plenty of velocity to still allow you to use 147 gr subs to not drop the velocity much below 1000 fps while still making a drastic reduction in db.
Of course, for dropping supers to subs, I'm pretty sure that the mp5sd uses thirty 2.5mm holes to get there but I haven't had the need to go that route on mine because the availability of sub ammo and components is pretty good.
I can PM you some detailed pics of my integral if you'd like. There may be some idea's that you can use.
Looks great.
I'll be honest, you should port the barrel, even with subs to make full use of that area, unless you're trying to use it as a reflex can.
From my experience, making six 9/64" ports in the barrel 2-1/2 inches from the chamber will retain plenty of velocity to still allow you to use 147 gr subs to not drop the velocity much below 1000 fps while still making a drastic reduction in db.
Of course, for dropping supers to subs, I'm pretty sure that the mp5sd uses thirty 2.5mm holes to get there but I haven't had the need to go that route on mine because the availability of sub ammo and components is pretty good.
I can PM you some detailed pics of my integral if you'd like. There may be some idea's that you can use.
I don't care what your chart says
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical integrally suppressed CZ Scorpion
John A. wrote:I saw the photos.
Looks great.
I'll be honest, you should port the barrel, even with subs to make full use of that area, unless you're trying to use it as a reflex can.
From my experience, making six 9/64" ports in the barrel 2-1/2 inches from the chamber will retain plenty of velocity to still allow you to use 147 gr subs to not drop the velocity much below 1000 fps while still making a drastic reduction in db.
Of course, for dropping supers to subs, I'm pretty sure that the mp5sd uses thirty 2.5mm holes to get there but I haven't had the need to go that route on mine because the availability of sub ammo and components is pretty good.
I can PM you some detailed pics of my integral if you'd like. There may be some idea's that you can use.
We do a ported version also, we use the same design for the MPX, AR9, and Scorpion. This is a customer gun and he didn't want the ported version because he handloads everything, 90% of these that we do are the ported version. This is the ported MPX we do, it has two chambers of ports.
http://imgur.com/euZjJqp
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
I really like those scoops on those sig baffles.
How much velocity do those 2 sets of ports bleed off?
How much velocity do those 2 sets of ports bleed off?
I don't care what your chart says
- curtistactical
- Silent But Deadly
- Posts: 469
- Joined: Fri Apr 25, 2014 9:22 am
Re: Curtis Tactical integrally suppressed CZ Scorpion
115gr pmc runs right around 1030fps, 147gr speer lawman runs right at 900fpsJohn A. wrote:I really like those scoops on those sig baffles.
How much velocity do those 2 sets of ports bleed off?
Joseph Jones
Curtis Tactical
07/02
Curtis Tactical
07/02
Re: Curtis Tactical integrally suppressed CZ Scorpion
Very nice work indeed.
Thanks for sharing !
Thanks for sharing !
I don't care what your chart says
-
- Senior Silent Operator
- Posts: 128
- Joined: Tue Apr 14, 2009 9:08 pm
- Location: NW Missouri
Re: Curtis Tactical integrally suppressed CZ Scorpion
Brilliant work!!!