I was wondering if anyone out here news about the two they use to help push the baffles out of the pistol suppressor and rim fire. It uses the mountain As a point for a push rod that is ribeyes for driver to push hard to get baffles out. I was wondering if anyone hear news effectively use another pistol to proceed with the same thread pitch have a nice way of getting out heavily used pistol battles.
I thought was pretty interesting and I hope anyone here can you give me some insight. Other than using a wooden daw to knock out baffles I thought the nice alternative to using a hammer and wooden daw
Griffin ornament that’ll screw toll for pistol suppressors
Moderators: mpallett, mr fixit, bakerjw, renegade
- Michael Black 47
- Silent But Deadly
- Posts: 164
- Joined: Mon Dec 01, 2014 10:57 pm
- Location: PA
Re: Griffin ornament that’ll screw toll for pistol suppressors
You need a new spell checker.
As far as I know the Griffin Armament pusher tool is included with the suppressor(s).
A wooden dowel works fine for the rest of us to push the baffles out if knocking the tube on a wooden bench doesn't do the job all by itself.
As far as I know the Griffin Armament pusher tool is included with the suppressor(s).
A wooden dowel works fine for the rest of us to push the baffles out if knocking the tube on a wooden bench doesn't do the job all by itself.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: Griffin ornament that’ll screw toll for pistol suppressors
If I haven't cleaned it for a while I will often put some Kroil penetrating oil or WD-40 or RemOil and let it soak the edges of the baffles overnight after turning it over once so you get it from both sides... then they push out easily... or use the tool...Michael Black 47 wrote:I was wondering if anyone out here news about the two they use to help push the baffles out of the pistol suppressor and rim fire. It uses the mountain As a point for a push rod that is ribeyes for driver to push hard to get baffles out. I was wondering if anyone hear news effectively use another pistol to proceed with the same thread pitch have a nice way of getting out heavily used pistol battles.
I thought was pretty interesting and I hope anyone here can you give me some insight. Other than using a wooden daw to knock out baffles I thought the nice alternative to using a hammer and wooden daw
Re: Griffin ornament that’ll screw toll for pistol suppressors
I've been having a lot of luck using Kroil in the manner that you described on suppressor baffles, changing AR barrels, even removing the Sprimgfield XDM sights pounded in dry by Andre the Giant's big brothers in Europe.gsyoung54 wrote:If I haven't cleaned it for a while I will often put some Kroil penetrating oil or WD-40 or RemOil and let it soak the edges of the baffles overnight after turning it over once so you get it from both sides... then they push out easily... or use the tool...Michael Black 47 wrote:I was wondering if anyone out here news about the two they use to help push the baffles out of the pistol suppressor and rim fire. It uses the mountain As a point for a push rod that is ribeyes for driver to push hard to get baffles out. I was wondering if anyone hear news effectively use another pistol to proceed with the same thread pitch have a nice way of getting out heavily used pistol battles.
I thought was pretty interesting and I hope anyone here can you give me some insight. Other than using a wooden daw to knock out baffles I thought the nice alternative to using a hammer and wooden daw
Re: Griffin ornament that’ll screw toll for pistol suppressors
You just quoted yourself to comment that you use the same method as yourself to remove your own baffles.gsyoung54 wrote:I've been having a lot of luck using Kroil in the manner that you described on suppressor baffles, changing AR barrels, even removing the Sprimgfield XDM sights pounded in dry by Andre the Giant's big brothers in Europe.gsyoung54 wrote:If I haven't cleaned it for a while I will often put some Kroil penetrating oil or WD-40 or RemOil and let it soak the edges of the baffles overnight after turning it over once so you get it from both sides... then they push out easily... or use the tool...Michael Black 47 wrote:I was wondering if anyone out here news about the two they use to help push the baffles out of the pistol suppressor and rim fire. It uses the mountain As a point for a push rod that is ribeyes for driver to push hard to get baffles out. I was wondering if anyone hear news effectively use another pistol to proceed with the same thread pitch have a nice way of getting out heavily used pistol battles.
I thought was pretty interesting and I hope anyone here can you give me some insight. Other than using a wooden daw to knock out baffles I thought the nice alternative to using a hammer and wooden daw
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- Sigproshooter
- Silent But Deadly
- Posts: 1931
- Joined: Sat Dec 29, 2007 10:29 am
Re: Griffin ornament that’ll screw toll for pistol suppressors
I thought the op was passing some kind of slick code to someone.
Regard your soldiers as your children, and they will follow you into the deepest valleys; look on them as your own beloved sons, and they will stand by you even unto death.
Sun Tzu
Sun Tzu
Re: Griffin ornament that’ll screw toll for pistol suppressors
The gold necklace is by the river.
The snow shoe is under the bridge.
Over.
The snow shoe is under the bridge.
Over.
I don't care what your chart says
Re: Griffin ornament that’ll screw toll for pistol suppressors
It is a bit surreal when the majority of lucid posts in a thread are off topic.Sigproshooter wrote:I thought the op was passing some kind of slick code to someone.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: Griffin ornament that’ll screw toll for pistol suppressors
Your post immediately following the question was the answer he was looking for. What more is there to add?
I don't care what your chart says
- Michael Black 47
- Silent But Deadly
- Posts: 164
- Joined: Mon Dec 01, 2014 10:57 pm
- Location: PA
Re: Griffin ornament that’ll screw toll for pistol suppressors
Its been awhile since I've posted this. wooden stick works out really well. but the comments here are gold.
Re: Griffin ornament that’ll screw toll for pistol suppressors
Me too. I was pretty confused about who was talking to whomSigproshooter wrote:I thought the op was passing some kind of slick code to someone.
Last edited by fishman on Fri Jul 13, 2018 9:54 am, edited 1 time in total.
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
Re: Griffin ornament that’ll screw toll for pistol suppressors
I agree. Only an idiot would quote himself.fishman wrote:Me too. I was pretty confused about who was talking to whomSigproshooter wrote:I thought the op was passing some kind of slick code to someone.
Last edited by fishman on Fri Jul 13, 2018 9:55 am, edited 1 time in total.
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
Re: Griffin ornament that’ll screw toll for pistol suppressors
I talk to myself all the time.
Sometimes I answer myself too.
Now where did I put my keys.
Oh yeah, they're on the night stand.
Sometimes I answer myself too.
Now where did I put my keys.
Oh yeah, they're on the night stand.
I don't care what your chart says
- Sigproshooter
- Silent But Deadly
- Posts: 1931
- Joined: Sat Dec 29, 2007 10:29 am
Re: Griffin ornament that’ll screw toll for pistol suppressors
Hahaha.....this is reminiscent of the old days. Funny comments, folks helping others and no safe spaces. Man I miss the old days. Break.......
Regard your soldiers as your children, and they will follow you into the deepest valleys; look on them as your own beloved sons, and they will stand by you even unto death.
Sun Tzu
Sun Tzu