Looking for Custom Suppressor for sporting shotguns
Moderators: mpallett, mr fixit, bakerjw, renegade
-
- New Member
- Posts: 2
- Joined: Sat Feb 16, 2019 6:52 am
Looking for Custom Suppressor for sporting shotguns
I am looking for help in locating suppressor devices for sporting shotguns. .410, 28, 20 and 12 gauge. I am willing to learn to build them, but would rather purchase from skilled craftsman or specialty shop. Any help?
Re: Looking for Custom Suppressor for sporting shotguns
Copy a salvo12
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
-
- Silent But Deadly
- Posts: 1204
- Joined: Fri Oct 11, 2013 3:09 pm
Re: Looking for Custom Suppressor for sporting shotguns
Your best bet is probably contacting ECCO Machine. Don't know if he's done shotgun work so far, but he can probably figure something nice and quiet for you.
search.php?author_id=61320&sr=posts
search.php?author_id=61320&sr=posts
Re: Looking for Custom Suppressor for sporting shotguns
They've been making shotgun suppressors for many years in Europe. Some of them are very well done.
And there was even a member here from New Zealand who made one a while back that sounded really good.
So, we all know that it can be done. It's just a matter of doing it.
I've thought about it for a while now, and I'm certain I can get the velocity down enough on some of my handloaded shells into subsonic territory. With 15.0 gr of titegroup powder, is already ~1090 fps, so dropping that further down to about 14.0 or 14.5 should be perfect for anything other than a semiauto. Should work fine in a single shot, pump, lever, or bolt shotgun.
And there was even a member here from New Zealand who made one a while back that sounded really good.
So, we all know that it can be done. It's just a matter of doing it.
I've thought about it for a while now, and I'm certain I can get the velocity down enough on some of my handloaded shells into subsonic territory. With 15.0 gr of titegroup powder, is already ~1090 fps, so dropping that further down to about 14.0 or 14.5 should be perfect for anything other than a semiauto. Should work fine in a single shot, pump, lever, or bolt shotgun.
I don't care what your chart says
-
- Silent But Deadly
- Posts: 239
- Joined: Sat Dec 31, 2016 5:38 pm
Re: Looking for Custom Suppressor for sporting shotguns
That’s going to be difficult. He could just do an integral, much easier than messing with alignment rods for individual baffles.fishman wrote:Copy a salvo12
-
- Silent But Deadly
- Posts: 222
- Joined: Thu Dec 11, 2014 11:09 am
- Location: Ohio
Re: Looking for Custom Suppressor for sporting shotguns
.410 Shotgun with various. 45 acp silencers... http://www.youtube.com/watch?v=a3SpwsjnueI