Silencer testing technology - SAS Impulsive Noise

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
sasgun
New Member
Posts: 4
Joined: Mon Jan 07, 2019 12:31 pm

Silencer testing technology - SAS Impulsive Noise

Post by sasgun »

I've been doing design a program custom to for popular and low-cost USB interfaces 192khz 24-bit ADC,which allows to measure as high as 180db, that could be used The silencer testing.

Screenshot of SAS Impulsive Noise Interface

Image

The trial version of SAS Impulsive Noise System use one Microphone only. :wink:

Trial Download
sasgun
New Member
Posts: 4
Joined: Mon Jan 07, 2019 12:31 pm

Re: Silencer testing technology - SAS Impulsive Noise

Post by sasgun »

Anyone test the program and presented some results?
updates software Ver 2 and the possibility of exporting the results to the CSV file on the desktop.

software Ver2.1
sasgun
New Member
Posts: 4
Joined: Mon Jan 07, 2019 12:31 pm

Re: Silencer testing technology - SAS Impulsive Noise

Post by sasgun »

Originally Posted By movingalong from AR15.com:
Finally got out and did a quick test using sas_77 program. Used my LMT MWS in .308 16" barrel, YHM Phantom SS .30 cal can, ZQI 7.62Nato ammo. On the sound side: GRAS 46BG mic/preamp combo, GRAS 12AL mic power supply, M-Audio M-Track 2X2M ADC. Calibrator is Larson Davis/PCB CAL-200, which supplies a 1khz tone at 114db.
Unsuppressed
Image

Suppressed with Phantom SS:
Image

Acceptable results with low-cost USB interfaces 192khz 24-bit ADC.
Post Reply