It's Here!!!! THE 9mm micro-can. w/ NEW DISASSEMBLY VIDEO!

Brooks@Thompson Machine · Sun Jan 10, 2010 11:15 am

Glad to see it works on the PM9!

AgentAdam · Post by **AgentAdam** » Wed Jan 13, 2010 5:10 pm

Round end can hold higher pressures.

A g19 barrel will fit a 26.

winsor · Post by **winsor** » Sat Jan 16, 2010 5:50 am

Hi Brooks,
Would you please show me a picture of a .22lr used wipe.
Just curious how it look like after shots.

TIA
winsor

Brooks@Thompson Machine · Sat Jan 16, 2010 1:21 pm

Winsor,

I'll take some pics of various used wipes and post them.

hedonistic · Post by **hedonistic** » Tue Jan 19, 2010 5:50 pm

used wipes, wet wipes, and end cap removal tools...
Sounds dirty

krinkov · Post by **krinkov** » Wed Jan 20, 2010 7:19 am

Any picture of the new mono core??????

Nighthawk · Post by **Nighthawk** » Wed Jan 20, 2010 5:33 pm

Yeah I'd also like to see some pics of the new mono core.

Also where it threads onto the barrel, are those threads aluminum or is there a steel or stainless insert?

If they are aluminum, will these threads wear over time and strip under repetition of firing?

Very interested in this silencer but kinda worried about the threads if they are aluminum.

Brooks@Thompson Machine · Wed Jan 20, 2010 6:32 pm

We generally try not to post to many pics of our cores. I'm sure one will pop up of the Poseidon core pretty soon though.

As for the aluminum thread issue, we have ABUSED our demo/prototype/shop cans purposefully and threaded them on and off hundreds of times and have yet to cross-thread or strip the rear endcap threads on one of our suppressors.

We have even gone so far as to fire a Poseidon .45 with a Poseidon 9mm front endcap on it to test the integrity of the threads. We fired 5 rounds of 230 grain .45 ball through a 9mm bore hole. It actually stripped the jackets off of the lead core and extruded the bullets through the front endcap leaving the stripped jackets inside the suppressor. Neither the front endcap, tube threads, or muzzle threads were damaged, and that Poseidon .45 is still our demo can. The 9mm Poseidon front endcap that we used is still on our Poseidon 9mm demo can. So what I'm saying here is that aluminum threads are not an issue.

Of course, if you do manage to bugger the rear endcap threads on your TM can, the rear endcap can be easily replaced because our cans come apart.

hedonistic · Post by **hedonistic** » Wed Jan 20, 2010 7:43 pm

not too hard to hela coil either

Lindenwood · Post by **Lindenwood** » Wed Jan 20, 2010 8:23 pm

I'd be nervous to helicoil such a precision part!

Nighthawk · Post by **Nighthawk** » Wed Jan 20, 2010 9:25 pm

Brooks@Thompson Machine wrote:We generally try not to post to many pics of our cores. I'm sure one will pop up of the Poseidon core pretty soon though.

I dont want detailed pics, I'm just curious how the end caps attach since you changed the design to replace the front wipe quicker.

It sounds like you've designed a well built suppressor that I just can't pass up. Sending an e-mail now to place an order.

Brooks@Thompson Machine · Thu Jan 21, 2010 12:08 pm

Nighthawk,

Email replied to!

hedonistic · Post by **hedonistic** » Thu Jan 21, 2010 2:19 pm

I for one am mad a Brooks. His new design has rendered my AAC scorpion obsolete and now I have to buy his.

hedonistic · Post by **hedonistic** » Thu Jan 21, 2010 2:33 pm

Lindenwood wrote:I'd be nervous to helicoil such a precision part!

I'd only do it as a last resort if it is not broke don't fix it. I never looked into that thread pitch either, it may not even be possible

Brooks@Thompson Machine · Thu Jan 21, 2010 5:11 pm

Hedonistic,

Don't be mad!

It's just that your Scorpion was telling us it was lonely and needed another tiny can for company.

hedonistic · Post by **hedonistic** » Thu Jan 21, 2010 7:19 pm

Brooks@Thompson Machine wrote:Hedonistic,

Don't be mad! It's just that your Scorpion was telling us it was lonely and needed another tiny can for company.

Calling my can tiny wont help you sell to me, you are not my type

hedonistic · Post by **hedonistic** » Sat Apr 03, 2010 5:16 pm

I am getting a $12,301 dollar tax return, shopping..

TPayne · Post by **TPayne** » Sat Apr 03, 2010 5:49 pm

hedonistic wrote:I am getting a $12,301 dollar tax return, shopping..

Damn. I'd definitely be getting a few more NFA goodies, too.

hedonistic · Post by **hedonistic** » Sat Apr 03, 2010 7:36 pm

Time to find out who has the tighter grip my wife on the purse strings or me on my balls.

[email protected] · Post by **[email protected]** » Sat Apr 03, 2010 8:22 pm

Does anyone know the db reduction on TM's cans? I haven't seen any info here or on silencerresearch.com.....

doubloon · Post by **doubloon** » Sun Apr 04, 2010 7:39 am

Tits is supposed to be testing it soon, it will cost you $30 to see the results.

I feel sure it won't be as quiet as a Trident, MultiMount or TiRant.

hedonistic · Post by **hedonistic** » Sun Apr 04, 2010 12:16 pm

doubloon wrote:Tits is supposed to be testing it soon, it will cost you $30 to see the results.

I feel sure it won't be as quiet as a Trident, MultiMount or TiRant.

What is this other pay to play forum?

doubloon · Post by **doubloon** » Sun Apr 04, 2010 12:21 pm

<edit> Tits == John Titsworth </edit>

If you mean another forum other than silencer research I don't know of one, there is another NFA forum called NFA Talk but AFAIK that one is all free.

Tits has the general silencer research forum but a year or two ago IIRC he started charging $30 for a "premium" membership which gets you access to the newer reviews and shootouts.

There were some free reviews and shootouts available to general access but it seems at least some of the reviews that used to be general access are now part of the premium membership.

mrrogers1 · Post by **mrrogers1** » Mon Apr 05, 2010 1:25 am

Very nice fellas!

Lance · Post by **Lance** » Mon Apr 05, 2010 5:46 am

can this little guy be used on a SMG like a MAC 11/9?