Sig P226 threaded barrel reccomendation

[dtu2179]

I have decieded to purchase a SWR Trident for my Sig Sauer P226 in 9mm. Now I am trying to find a good threaded barrel for the setup. I'm guessing that the LCR device that helps the gun cycle requires a specific thread cut so I would have to find one with that threadding. Was planning to call SWR Monday to see if they had any that they reccomend. Anyone have any reccomendations?

[bigbigpig]

http://www.topgunsupply.com/sig_p226-re ... eaded.html

Get the Sig factory threaded barrel for your 226. It'll come threaded LH 13.5x1 so order your Trident booster in that thread pitch. Top Gun is showing out of stock but email or call them to find out when more will be available. You can search around for other suppliers - but the factory barrel is your best bet.

[dtu2179]

Thanks for the link. That is exactly what I was looking for. I put myself on the email notification for when they are back in stock. A bit pricey, but I guess you get what you pay for. Hopefully SWR make the LCR Device with that threading.

[OkieSnoop]

SIG does make that thread pitch - it's a factory barrel. I have this set up exactley a SIG 226 W/ threaded barrel & a SWR Trident.........great stuff, reliable, quiet, simply outstanding....you will be very happy

[BriggsRi]

You could just send your factory bbl to Tornado Tech and have them put on a thread extension for 1/2 the price of buying a new bbl.

[doubloon]

Sig supposedly has factory barrels threaded 1/2x28 but I heard you have to call them because the barrels aren't listed on the web site.

My P226S4 came with a 1/2x28 barrel.

[dtu2179]

You could just send your factory bbl to Tornado Tech and have them put on a thread extension for 1/2 the price of buying a new bbl.

I saw them when I was searching around, but I did not see the SIG 226 barrel listed as one that they threaded their extension onto. Is the barrel extension perminently attached or could it become unthreaded?

[dtu2179]

Sig supposedly has factory barrels threaded 1/2x28 but I heard you have to call them because the barrels aren't listed on the web site.

My P226S4 came with a 1/2x28 barrel.

Will they sell direct to me, SIG that is, or would they have to ship to a dealer? I was thinking that the 1/2x28 would be better cause then I could use the same LCD on a Glock threaded barrel if I wanted to.

[BriggsRi]

You could just send your factory bbl to Tornado Tech and have them put on a thread extension for 1/2 the price of buying a new bbl.

I saw them when I was searching around, but I did not see the SIG 226 barrel listed as one that they threaded their extension onto. Is the barrel extension perminently attached or could it become unthreaded?

I'm thinking permanently attached, but I would call T.T. just to be sure. What I do know is, the bbl is threaded for the extension and a thread protector comes with.

[dtu2179]

http://www.topgunsupply.com/sig_p226-re ... eaded.html

Get the Sig factory threaded barrel for your 226. It'll come threaded LH 13.5x1 so order your Trident booster in that thread pitch. Top Gun is showing out of stock but email or call them to find out when more will be available. You can search around for other suppliers - but the factory barrel is your best bet.

Does anyone know any place that has these in stock? I am going to start the purchase of the Trident tomarrow. I think I would prefer to go with the factory SIG barrel at this time.

[DeltaPDesign]

You could have Tornado Technologies extend/thread the barrel 1/2-28. Their work is very sharp. If you need turnaround, just call them and see what they can do, they might be doing a run.

[saltydecimator]

How much does that run you at tt? I have a g17 That i might do as well as a sig 230...other question does lone wolf sell lh 13 barrels for Glocks?

[doubloon]

...
Will they sell direct to me, SIG that is, or would they have to ship to a dealer? I was thinking that the 1/2x28 would be better cause then I could use the same LCD on a Glock threaded barrel if I wanted to.

As far as I know they will.

I like 1/2x28 over 13.5 because everything tightens in the same direction.

[rivercityrats]

Replies: 15
Views: 352
This was a post of mine about 6 weeks ago, yes that factory bbl prints the same as the stock one. 1/2X28 factory.
Got my Sig threaded barrel today . Huge shout out to Jeremy, he has great customer service, and fantastic person. Jeremy Powell Bulls-Eye Indoor Range & Gun Shop 221 W Crogan Street Lawrenceville, GA 30046 Phone: (770) 963-6556 Fax: (770) 963-8922 http://www.bullseyeindoorrange.com E-Mail: bulls...

[CapitolArmory]

Does anyone know any place that has these in stock? I am going to start the purchase of the Trident tomarrow. I think I would prefer to go with the factory SIG barrel at this time.

I have a few SIG 226 factory TBs in stock. PM for a price.

[dtu2179]

Thanks for all of the info guys. I wound up getting the SIG factory barrel from the dealer I am getting the Trident from. Was suprised when he said he had them in stock.

They have a range attached to the store and he let me fire one set up like I plan to do. Very nice