Similar problem to another thread except I'd like to mate a 300 BLK bbl with a 5/8x24 thread to a 9mm can that will be fitted with a 1/2x28 or a 3 lug. Where should I look for such an adapter?
Thanks guys!
Need a 5/8x24 to 1/2x28 or 3 lug adapter
- eastern_hunter
- Silent But Deadly
- Posts: 966
- Joined: Sat Nov 21, 2009 8:34 pm
- Location: Charleston, WV
Re: Need a 5/8x24 to 1/2x28 or 3 lug adapter
I bought one from TROS to do that: go from 5/8x24 to 1/2x28 so that I could use a 9mm suppressor with 338 Federal subsonic. Their adapters page doesn't show this one, but they do make it. E-mail them and ask for a price quote.
http://www.trosusa.com/Adapters/Adapters.htm
http://www.trosusa.com/Adapters/Adapters.htm
You can fool all of the people some of the time, and some of the people all of the time...and those are pretty good odds.
Brett Maverick, gambler on TV (also used by Progressive leaders everywhere)
Brett Maverick, gambler on TV (also used by Progressive leaders everywhere)
Re: Need a 5/8x24 to 1/2x28 or 3 lug adapter
i found one that goes the other way
http://www.tornado-technologies.com/cgi ... 8-0.625X24
maybe they can make one in the setup you want
do you want the 5/8 to 3 lug or 5/8 to 1/2?
http://www.tornado-technologies.com/cgi ... 8-0.625X24
maybe they can make one in the setup you want
do you want the 5/8 to 3 lug or 5/8 to 1/2?
Re: Need a 5/8x24 to 1/2x28 or 3 lug adapter
I had TROS make one but it took a couple months.
- prdubi
- Silent But Deadly
- Posts: 370
- Joined: Sat Feb 18, 2006 3:38 pm
- Location: Deep in the heart of Rural South SALEM, Oregon
- Contact:
Re: Need a 5/8x24 to 1/2x28 or 3 lug adapter
Tornado tech has it in stock, just call them up.
Re: Need a 5/8x24 to 1/2x28 or 3 lug adapter
I think it's the wrong adapter. He's looking for 5/8x24 Female to 1/2x28 Male.prdubi wrote:Tornado tech has it in stock, just call them up.