How bad of an idea is this?
Moderators: mpallett, mr fixit, bakerjw, renegade
-
- Senior Silent Operator
- Posts: 149
- Joined: Sat Dec 11, 2010 3:49 pm
How bad of an idea is this?
Can a quick attach mount be left in the can, and then moved between hosts by threading it on? As long as you made sure it did not loosen while being used, could it be done safely?
Re: How bad of an idea is this?
Why not just use a screw-on can then? What you suggest kind of negates the purpose of a QD can, and adds one more piece that can mess up.
-
- Senior Silent Operator
- Posts: 149
- Joined: Sat Dec 11, 2010 3:49 pm
Re: How bad of an idea is this?
I realize that, I just want to know if anyone has done it or is it possible, specifically with a 762 Sd aac can.
Re: How bad of an idea is this?
What he said....but yes, you can do it your way if you already have a QD can and want to use it as a screw on.
- ghostdog662
- Silent But Deadly
- Posts: 655
- Joined: Thu Mar 06, 2008 3:19 pm
- Location: TX
Re: How bad of an idea is this?
I would just be worried about removing the QD mount from the can when the time comes.
LP
Re: How bad of an idea is this?
...Planning to shoot and run?? Just not sure which gun yet?!
Seriously though, my answer is stupid, bad and pointless, but it will work. Your question is "How bad of an idea is this?" not, "will it work"
Seriously though, my answer is stupid, bad and pointless, but it will work. Your question is "How bad of an idea is this?" not, "will it work"
Re: How bad of an idea is this?
Normally the mount for a QD can is secured with some kind of locking thread compound. It would not be easy to remove and screw onto another host quickly. Just buy a second mount.
-
- Senior Silent Operator
- Posts: 149
- Joined: Sat Dec 11, 2010 3:49 pm
Re: How bad of an idea is this?
Just too many rifles and I'd rather buy another can instead of five qa mounts.
-
- Silent But Deadly
- Posts: 419
- Joined: Wed Jul 07, 2010 2:10 am
- Location: Melbourne, FL
- Contact:
Re: How bad of an idea is this?
Theoretically possible but bad idea. For example: If you look at the manual to something like the M4-2000, it strongly suggests removal of the can from the mount after every 200 rounds.jnitti1014 wrote:Can a quick attach mount be left in the can, and then moved between hosts by threading it on? As long as you made sure it did not loosen while being used, could it be done safely?
GoingQuiet.com
07 FFL / 02 SOT
Melbourne, FL
NFA Sales & Transfers, Silencerco Stocking Distributor, AAC, SigSauer, Gemtech, Rock River Arms Stocking Dealer
[email protected]
07 FFL / 02 SOT
Melbourne, FL
NFA Sales & Transfers, Silencerco Stocking Distributor, AAC, SigSauer, Gemtech, Rock River Arms Stocking Dealer
[email protected]
Re: How bad of an idea is this?
That sounds like a better idea if you want a screw on.jnitti1014 wrote:Just too many rifles and I'd rather buy another can instead of five qa mounts.