Suggestions for thread-mounted 5.56mm can?

General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

All NFA laws apply.

Moderators: mpallett, mr fixit, bakerjw, renegade

Post Reply
Mike M.
Member
Posts: 29
Joined: Thu Apr 20, 2006 9:05 am

Suggestions for thread-mounted 5.56mm can?

Post by Mike M. »

I'm thinking of suppressing an AR, don't have a need for a quick-release mounting (or its cost). Any suggestions? TIA.
Top
User avatar
gwendell
Silent But Deadly
Posts: 153
Joined: Fri Mar 11, 2011 8:01 am
Location: Charleston, WV
Contact:
Contact gwendell

Re: Suggestions for thread-mounted 5.56mm can?

Post by gwendell »

Mike M. wrote:I'm thinking of suppressing an AR, don't have a need for a quick-release mounting (or its cost). Any suggestions? TIA.
AAC Ranger 3, YHM 5.56 Phantom, Gemtech Trek......The ACC Ranger 3 has all Inconel internals :)
" The average response time of a 911 call is over 3 minutes....the response time of a .44 magnum is 1400 feet per second "
Top
User avatar
Schulze
Silent But Deadly
Posts: 997
Joined: Fri Mar 14, 2008 5:03 pm
Location: TEXAS

Re: Suggestions for thread-mounted 5.56mm can?

Post by Schulze »

ARIS 4
Top
kaotic504
Silent But Deadly
Posts: 438
Joined: Sat Mar 13, 2010 8:26 pm

Re: Suggestions for thread-mounted 5.56mm can?

Post by kaotic504 »

+1 AAC Ranger 3. it's supposed to be like the M4-2000 but shorter and not QD. at $550 MSRP, and probably a bit less through a vendor/sponsor, it's a steal.
Top
SRM
Silent But Deadly
Posts: 1825
Joined: Mon Mar 15, 2010 7:20 pm
Location: wyoming

Re: Suggestions for thread-mounted 5.56mm can?

Post by SRM »

Liberty Torch is the only one I`ve heared. 500$ and all SS.
Top
SRM
Silent But Deadly
Posts: 1825
Joined: Mon Mar 15, 2010 7:20 pm
Location: wyoming

Re: Suggestions for thread-mounted 5.56mm can?

Post by SRM »

It apears QSM upsized their .223 and .308 cans. I`d like to know some #`s.
Top
Post Reply

Return to “Silencer Talk”