My WWII MKII
Moderators: mpallett, mr fixit, bakerjw, renegade
Re: My WWII MKII
Please pardon my ignorance Emilio
What is the other piece with the 550 cord on it? Is it a plate that fitts under the grips and allows a retention lanyard to be attached ?
What is the other piece with the 550 cord on it? Is it a plate that fitts under the grips and allows a retention lanyard to be attached ?
If at first you don't succeed, RELOAD!!
Re: My WWII MKII
It is a bullet removal tool for after you take out the bg..woodstove wrote:What is the other piece with the 550 cord on it?
"If you carry a gun, people call you paranoid. That's ridiculous. If I have a gun, what in the hell do I have to be paranoid about?"
Clint Smith
Clint Smith
Re: My WWII MKII
It a Japanese knife. Maybe should have used GI Bayonet for the pic .
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
Re: My WWII MKII
picture shows what appears to be a slot machined into the side of the suppressor, is that correct?
- GoJohnnyGo
- Silent But Deadly
- Posts: 345
- Joined: Wed Jul 15, 2009 8:19 pm
Re: My WWII MKII
No, he just blacked out the serial number with paint.
Re: My WWII MKII
thxGoJohnnyGo wrote:No, he just blacked out the serial number with paint.
Re: My WWII MKII
It a Japanese knife.
Thanks Emilio. I have never seen a lanyard for the MkIIs, only para cord and 100 mile an hour tape rigs
Thanks Emilio. I have never seen a lanyard for the MkIIs, only para cord and 100 mile an hour tape rigs
If at first you don't succeed, RELOAD!!
Re: My WWII MKII
You stick a dime in for moderate suppression, but when you really need to be quiet, you shoehorn a quarter in there.jaredr wrote:picture shows what appears to be a slot machined into the side of the suppressor, is that correct?
Re: My WWII MKII
Emilio,
I promised pics when I finished mine. A Buck Rogers Tactical. I just finished re-finishing it.
SS MKIII Standard profile
3.5" barrel
Spectre II/ Sparrow thread specs
Media blasted matte finish
V- speed eject
V- trigger and sear
FCG modified back to MKII specs
Fixed rear sight modified to low profile
Front sight removed and Hi-Viz sight added
Texture removed from blk grips and finished matte
I promised pics when I finished mine. A Buck Rogers Tactical. I just finished re-finishing it.
SS MKIII Standard profile
3.5" barrel
Spectre II/ Sparrow thread specs
Media blasted matte finish
V- speed eject
V- trigger and sear
FCG modified back to MKII specs
Fixed rear sight modified to low profile
Front sight removed and Hi-Viz sight added
Texture removed from blk grips and finished matte
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
-
- Silent But Deadly
- Posts: 1873
- Joined: Tue Apr 14, 2009 2:14 pm
Re: My WWII MKII
What media, grit , psi did you use? Thanks!
Re: My WWII MKII
Starblast medium, 80 psi
BTW, This was completely disassembled, masked and finished. If you do this, putting the mainspring housing (plunger, spring, ball bearing, lever) together again was a PAIN IN THE ASS!
BTW, This was completely disassembled, masked and finished. If you do this, putting the mainspring housing (plunger, spring, ball bearing, lever) together again was a PAIN IN THE ASS!
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
-
- Senior Silent Operator
- Posts: 116
- Joined: Fri Apr 22, 2011 1:47 pm
Re: My WWII MKII
Noice!
Re: My WWII MKII
Sweet! Nice job, look good with the SpecreII.strobro32 wrote:Emilio,
I promised pics when I finished mine. A Buck Rogers Tactical. I just finished re-finishing it.
SS MKIII Standard profile
3.5" barrel
Spectre II/ Sparrow thread specs
Media blasted matte finish
V- speed eject
V- trigger and sear
FCG modified back to MKII specs
Fixed rear sight modified to low profile
Front sight removed and Hi-Viz sight added
Texture removed from blk grips and finished matte
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!