I want to suppress my ak's
Moderators: mpallett, mr fixit, bakerjw, renegade
I want to suppress my ak's
I want to suppress my Arsenal SLR 107, SGL 21, and sbr. What is the best can? Does anyone make a quick detach system? Was looking at the orginal 762SD. Prefer a lightweigh durable option. Will send rifle to check the barrel concentrics before adding can. If I have a baffle strike could it dammage the rifle?
- Furyataurus2.0
- Member
- Posts: 19
- Joined: Tue Oct 16, 2012 9:31 pm
- Location: Helotes, TX
Re: I want to suppress my ak's
Go with YHM.
Baffle strike will only hurt the can since it's already past the barrel.
I'd suggest ADCO or even YHM itself for barrel work on AK's.
And no I don't have an AK or a YHM can yet.
Baffle strike will only hurt the can since it's already past the barrel.
I'd suggest ADCO or even YHM itself for barrel work on AK's.
And no I don't have an AK or a YHM can yet.
Be a fountain, not a drain
Re: I want to suppress my ak's
If nobody has told you yet... AK's don't suppress well. Even with a can, they're still LOUD.
-
- Senior Silent Operator
- Posts: 116
- Joined: Fri Apr 22, 2011 1:47 pm
Re: I want to suppress my ak's
YHM phantom....
- Libertarian_Geek
- Silent But Deadly
- Posts: 3116
- Joined: Tue Jul 07, 2009 9:52 am
- Location: Snarkeville, MS
Re: I want to suppress my ak's
Guys. He has an Arsenal AK. It's got those big 24mm threads. YHM doesn't make a mount for it.
Kip42, you need one of these:
http://www.gunbroker.com/Auction/ViewIt ... =318482784
Uses the AK's own detent to prevent unscrewing.
Kip42, you need one of these:
http://www.gunbroker.com/Auction/ViewIt ... =318482784
Uses the AK's own detent to prevent unscrewing.
https://www.facebook.com/DareDefendOurRights
Re: I want to suppress my ak's
Not light but made for AK. http://www.huntertownarms.com/k762ak.php
Member of the LSU, SWR, and RUGGED underground. Shame Silencerco!
Re: I want to suppress my ak's
Depends on your AK. My Draco SBR suppresses pretty well (for a centerfire rifle). Now my WASR10, not as well, but better than unsuppressed
Think part of it has to do with the gas tube on your gun, vented or not. Draco is not vented, WASR is.
Think part of it has to do with the gas tube on your gun, vented or not. Draco is not vented, WASR is.
Re: I want to suppress my ak's
I had an AK. Also have a YHM P-QD-SS.
Long story short, I sold both my AK's to fund my 300 blk.
I've seen one AK with a can and it sounded as loud or slightly louder than my .22 with no can. If you want to do it, I say go for it. If you dont "have" to do it, switch and get a 300 blk.
"come on in boys, the water is nice"
~ soggy bottom boys
Long story short, I sold both my AK's to fund my 300 blk.
I've seen one AK with a can and it sounded as loud or slightly louder than my .22 with no can. If you want to do it, I say go for it. If you dont "have" to do it, switch and get a 300 blk.
"come on in boys, the water is nice"
~ soggy bottom boys
YHM 7.62 Phantom QD
T.I. Stratus .22
AAC Eco-9
YHM15 SBR (pending)
T.I. Stratus .22
AAC Eco-9
YHM15 SBR (pending)
Re: I want to suppress my ak's
I run my YHM Phantom QD on my Draco AK and it sounds pretty dang good for supersonic ammo, I did run it on an older Arsenal SA85 that sounded quite a bit louder. I will say that an AK suppressed is far more pleasing to the ears than one that isnt.Wahnsinn wrote:Depends on your AK. My Draco SBR suppresses pretty well (for a centerfire rifle). Now my WASR10, not as well, but better than unsuppressed
Think part of it has to do with the gas tube on your gun, vented or not. Draco is not vented, WASR is.
AAC Cyclone-BRANDED FOR LIFE MEMBER
-
- Silent But Deadly
- Posts: 248
- Joined: Thu Aug 28, 2008 3:36 am
Re: I want to suppress my ak's
I've been through quite a bit of trouble trying to fit a can to my SLR-106. I tried the Brevis AK can shown in this thread and found it to be very loud and not worth the weight.
I think the best option at this time is to either check into the Kestrel from Huntertown or find a gunsmith that would be willing to turn down the 24mm threaded portion of the front sight into a shoulder for the can and then thread the muzzle. My experience with this is that not many gunsmiths want to touch it.
If you happen to find a smith that will take the job, please let me know.
I think the best option at this time is to either check into the Kestrel from Huntertown or find a gunsmith that would be willing to turn down the 24mm threaded portion of the front sight into a shoulder for the can and then thread the muzzle. My experience with this is that not many gunsmiths want to touch it.
If you happen to find a smith that will take the job, please let me know.
-
- Senior Silent Operator
- Posts: 149
- Joined: Sat Jul 03, 2010 9:17 pm
Re: I want to suppress my ak's
I have a standard Romanian AK, a Yugo RPK and a Galil ARM that I shoot suppressed using a YHM SS QD Phantom and I think they sound great. Any rifle shooting supersonic ammo isn't gonna be super quiet but to me it's worth it and the suppressor really takes the bark out of it.