Zeiss 6-24x72 mounting
Zeiss 6-24x72 mounting
What mount are you using for your 6-24x72? I have it ready to go on my Tikka T3 Tactical but the standard height 34mm rings from Zeiss are about 2mm too low with the stock Tikka 0 moa picatinny base. Thanks.
A southern Arizona SOT - www.quiettimesports.com
Re: Zeiss 6-24x72 mounting
Nobody answered this?
If you're saying the objective lense is too big for standard rings, then you might try a run-of-the-mill riser, to get the little extra. I don't know how that will affect your bolt-action; but its a suggestion. Plus, if it doesn't work out, you're not out much money for the riser.
If you're saying the objective lense is too big for standard rings, then you might try a run-of-the-mill riser, to get the little extra. I don't know how that will affect your bolt-action; but its a suggestion. Plus, if it doesn't work out, you're not out much money for the riser.