CT Born and Raised

Connecticut, Maine, Massacusetts, New Hampshire, Rhode Island, Vermont
User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

CT Born and Raised

Post by jgreg65 » Mon Mar 05, 2007 9:37 pm

Anyone else on the boards from CT ?

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

CT

Post by ljtfisherman » Sun Mar 11, 2007 5:55 pm

Just joined, I've been in Ct for about 20 years now.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Sun Mar 11, 2007 8:14 pm

Good Deal!! Welcome to the boards!! I'm fairly new to the boards too, my first can should be in my hands in the next week or so!

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

CT

Post by ljtfisherman » Mon Mar 12, 2007 6:39 am

Still waiting for my first can to get to dealer. It is a tough wait.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Mon Mar 12, 2007 7:58 am

I've been going to Newington Gun Exchange. And unfortunately Lars has been Stocking Yankee Hill Machine Cans all different models. So he breaks one out of the case and hands it to me, or he already has it on a weapon just for show and makes customers drool all over it!!

What kind of can are you going with?

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

ct

Post by ljtfisherman » Mon Mar 12, 2007 11:13 am

I am going through JOJOS in Southington (Nice Shop). Jodie was son part of Joseph’s in New Britain.

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

Ct

Post by ljtfisherman » Mon Mar 12, 2007 8:28 pm

Gemtec 22 can!

supp-22
Member
Posts: 49
Joined: Mon Dec 25, 2006 12:34 am
Location: Ct.

Post by supp-22 » Mon Mar 12, 2007 9:41 pm

Hi Guys,I'm in Ct also.
I have a Ruger 22/45 Integral
A Ruger 77/44 Integral

ljtfisherman, I have a Pac-Lite upper that your gemtech might screw on, when you get it let me know, I would like to see if it works, if you don't mind.

jgreg65, What kind of can are you getting?

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Tue Mar 13, 2007 6:13 am

hey supp-22

I have a YHM 223 Phantom waiting just a few more days to get in my safe. The ATF says this week. and have a .22 cal wraith YHM Can paid for and on hold waiting for me to send in the paperwork.

How bad is that? I dont even have my first can in my safe and I have another in the works!! Dam its a sickness! I want to mainly use that one on my 10/22 with a Tactical Solutions barrel, then on my Sig mosquito and my Walther P22. Then I'm sure there will be a 9mm can on order later on in the year.

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

ct

Post by ljtfisherman » Tue Mar 13, 2007 6:31 am

Sounds good, you have to let me know on how .223 can work, if you can shoot with hearing protection. I have a bushmaster and it is defining with out protection.

The 22 can, will be placed on a Thompson Contender (closed breach should be quite) first then the 10/22 and maybe a Ruger target pistol. I can see this could be addicting.

Did you get your 223 can from Lars.

Hi
supp-22
We could get together when it comes in, no problem. Still waiting to put in paper work so could be a while. What part of State are you in, I am between Hartford and Waterbury.

How quite is the Ruger 22/45.

supp-22
Member
Posts: 49
Joined: Mon Dec 25, 2006 12:34 am
Location: Ct.

Post by supp-22 » Tue Mar 13, 2007 9:20 am

I'm in Torrington

All you hear is bolt action and hit on target with the 22/45

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

ct

Post by ljtfisherman » Tue Mar 13, 2007 11:50 am

Nice

I am in Plainville.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Wed Mar 14, 2007 2:35 pm

Yep Lars is the culprit!! :D

I was in there yesterday and he is trying to talk me into a 308 can!! I'm sure it will be in my safe at some point. I just want to get my hands on the 223 and the 22 cans first. I really want to try the 22 wraith on my 10/22 that should be fun. But I gotta grab another Tac Sol bbl with threads. So that easy to swallow price on the can from Lars - sunk me for another 200 for the stamp 245, for the bbl and 40 for the Living Trust software $485 then the Can price! What a money pit LOL!!!

Count me in if you guys want to hit the range with them sometime. I'm in Orange / West Haven but I'll travel to any range. You name it!

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

ct

Post by ljtfisherman » Thu Mar 15, 2007 11:01 am

Sounds good about going to rang, I still have to put in my paper work. Expect cans to be in next week to start that. So it could be a while for me.

Lets keep in touch!

Malaga2
Silent Operator
Posts: 51
Joined: Tue Dec 26, 2006 10:49 pm

Post by Malaga2 » Sun Mar 25, 2007 8:13 pm

I just want to get my hands on the 223 and the 22 cans first.

The 308 will work well on a 223. I use a Thundertrap on both a CZ527 bolt gun and an AR15 as well as 30/30,308 and 300 Whisper.

:arrow:

User avatar
ljtfisherman
Member
Posts: 24
Joined: Sat Jan 13, 2007 10:46 am
Location: CT

Ct

Post by ljtfisherman » Mon Mar 26, 2007 6:46 pm

Me can't wait until they come in, so I can get started with paperwork!

22 can and a 223 can on this end!

User avatar
SilentSig
Silent Operator
Posts: 68
Joined: Wed Jan 17, 2007 10:26 pm

Post by SilentSig » Sun Apr 01, 2007 2:36 pm

Im in CT also. I have a SBR pending, and then am looking to do a Trident 9mm can. That way I can have it on my SBR, and also on my SiG 226. :)

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Mon Apr 02, 2007 4:34 am

SilentSig wrote:Im in CT also. I have a SBR pending, and then am looking to do a Trident 9mm can. That way I can have it on my SBR, and also on my SiG 226. :)
SBR NICE!!!!!! On your 226 Oh man you have to post pics of it when you get it together. I haven read much on the Tridents. I gotta look around a bit on them. Good luck Keep us up on how it goes.

User avatar
jonemtp
Member
Posts: 33
Joined: Fri Apr 06, 2007 8:34 pm
Location: Northford, CT

Post by jonemtp » Mon Apr 09, 2007 7:18 pm

I live in Northford, right on the Wallingford town line.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Mon Apr 09, 2007 8:29 pm

jonemtp wrote:I live in Northford, right on the Wallingford town line.
Good deal Glad to have you here Jonemtp.

Bladesmith
Member
Posts: 19
Joined: Tue Apr 10, 2007 11:17 am
Location: Connecticut
Contact:

Post by Bladesmith » Wed May 02, 2007 3:15 am

Whats up guys, im from Eastford CT... never heard of it? Most people haven't. I live in the middle of nowhere (almost in MA off 395). Good to see some other gun loving CT people here... too many liberals in this state for my taste.

I have an AAC Aviator on the way for my 10/22, 77/22 (1:9 twist for Aguila SSS), and Beratta 87T (awesome little gun but badly needs trigger work... pull is heavy and waaay too much overtravel). I am also going to SBR a 10/22, AR-15, and SBS a Remington 870 to go off to Wilson combat for their Border Patrol treatment.

I am waiting for my CLEO to approve... anybody have trouble in this area and have to go the trust or LLC route?

I deal with Joel Cramer at Remarcable Arms in Wallingford, really good guy, good prices.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Wed May 02, 2007 4:49 am

Bladesmith wrote:Whats up guys, im from Eastford CT... never heard of it? Most people haven't. I live in the middle of nowhere (almost in MA off 395). Good to see some other gun loving CT people here... too many liberals in this state for my taste.
I deal with Joel Cramer at Remarcable Arms in Wallingford, really good guy, good prices.
WOW Eastford to Wallingford! Thats just a hop skip and jump! Glad to hear your on the boards. WELCOME, I might have to stop in and see your dealer. Thanks for the heads up.

I'm into 10/22's too. Keep us up on your project sounds cool.

User avatar
SilentSig
Silent Operator
Posts: 68
Joined: Wed Jan 17, 2007 10:26 pm

Post by SilentSig » Wed May 02, 2007 7:20 pm

Finally had my Form 1 SBR approved after 82 days. It was lost on a desk, after several phone calls.

Will be looking into the can hopefully this week.

User avatar
jgreg65
Silent But Deadly
Posts: 360
Joined: Thu Feb 15, 2007 7:03 pm

Post by jgreg65 » Thu May 03, 2007 4:40 am

SilentSig wrote:Finally had my Form 1 SBR approved after 82 days. It was lost on a desk, after several phone calls.

Will be looking into the can hopefully this week.
NICE Gonna be a heck of a weekend for you

evan1293
New Member
Posts: 4
Joined: Thu May 17, 2007 7:50 pm
Location: CT

Post by evan1293 » Thu May 17, 2007 8:09 pm

Hey guys, just joined this forum today. I bought a YHM cobra can from lars a few months ago and Im gearing up for my next one for the m4. Im learning that these NFA toys are pretty addictive!

Post Reply