i have a specwar 762 but want another 762 can. I'm trying to decide between the saker 762 (i love my saker 556), sdn6, & the oss.
Anyone have any thoughts? I know Silencerco has the best customer service, AAC is being relocated next year, & oss hustling around trying to make a name for themselves.
All companies being equal, which is the better can?
i want a new 762 can
Moderators: mpallett, mr fixit, bakerjw
-
- Silent Operator
- Posts: 89
- Joined: Tue Mar 04, 2014 11:26 am
Re: i want a new 762 can
What are you going to be using the can for? It would help people give you suggestions if we knew what you were going to do with it. Your specwar 762 should be quieter than either the saker 762 or sdn6. From the limited information you gave, I'd go with the saker 762 since you already have a saker 556. You could use it on your guns that already have the saker 556 mounts, but you couldn't do that with a sdn6.
Re: i want a new 762 can
I didn't mention specific uses because i don't want a specific use can. I need a can that may not be the best at one or two things but is great at every thing. I'm cool with changing mounts, i'll just give them away like I already do. Nothing I have shot beats the specwar but I honestly would get another one if it used the maad mount, but thats my own little fantasy.
Not concerned with db because they're pretty much all around the same ballpark.
I want a fun durable can that can take full auto & won't carbon fart my face every time i pull the trigger.
The saker 556 kicks a little more gas in my face vs the specwar, so it would be nice not to have that happen as much. OSS promotes that their cans reduce that aspect.
I shot both the saker 762 & 30p-1 today & the saker definitely pushed out less gas.
As far as the sdn6, I just hear that its a great can or that it wobbles.
Not concerned with db because they're pretty much all around the same ballpark.
I want a fun durable can that can take full auto & won't carbon fart my face every time i pull the trigger.
The saker 556 kicks a little more gas in my face vs the specwar, so it would be nice not to have that happen as much. OSS promotes that their cans reduce that aspect.
I shot both the saker 762 & 30p-1 today & the saker definitely pushed out less gas.
As far as the sdn6, I just hear that its a great can or that it wobbles.
-
- Silent Operator
- Posts: 89
- Joined: Tue Mar 04, 2014 11:26 am
Re: i want a new 762 can
The SDN-6 is a great can AND it does wobble a little bit depending on the mount. Despite the loose fit, the testing I've done with mine hasn't shown any accuracy degradation, but consistently showed an accuracy improvement. If you don't mind a little elbow grease, you can eliminate most of the wobble by fitting the flash suppressor to the can. Shooting mostly light 556 loads and subsonic 300 blk (with a few Fed XM193 and hand loaded 300BLK supers through into the mix) back pressure doesn't seem to be that bad; however, I do get a whiff of gas in the eyes every once in a while that makes me pause. I'm a lefty so I probably get expose to more gas than righties. I don't know how it compares to other cans since its my only rifle suppressor. I'll still stick with my previous recommendation and advise you to go with the Saker 762 since you already have the MAAD trifectas on a few rifles.
Re: i want a new 762 can
Thanks savagetactical, the saker seems to be the one to get
Re: i want a new 762 can
I ordered the 762 Saker, I saw the OSS being fired before in Afghanistan but was too busy working to eval it. it seems big but from what I remember it was pretty efficient. the Saker can fit the specwar's QD mount with the right MAD mount so you dont have to worry about it.
Visit my Wounded Hunter Project Blog!
https://woundedhunterproject.wordpress.com/
It has a beard and its climbing mountains ... it must be a billy goat! wait, it has a Rifle!
https://woundedhunterproject.wordpress.com/
It has a beard and its climbing mountains ... it must be a billy goat! wait, it has a Rifle!
Re: i want a new 762 can
I ordered the Saker 762 & the Harvester 762. With the existing mounts, here are my plans. If you have a better arrangement, let me know.
Saker 556 & 762:
7.5" 556 SBR AR15
16" 556 AR15 Piston
16: 545x39 AR15 Piston
16" 762x39 Wasr 10
Harvester 762:
m1891 Mosin Nagant
16" 308 Savage Axis bolt rifle
Specwar 762:
16" 300 Blackout AR15
14.5" 556 AR15 Pistol
Sparrow 22:
17" 22lr AR15
Warlock 22:
Ruger 22/45
Osprey 45:
1911A1
Glock 30
Glock 27
Saker 556 & 762:
7.5" 556 SBR AR15
16" 556 AR15 Piston
16: 545x39 AR15 Piston
16" 762x39 Wasr 10
Harvester 762:
m1891 Mosin Nagant
16" 308 Savage Axis bolt rifle
Specwar 762:
16" 300 Blackout AR15
14.5" 556 AR15 Pistol
Sparrow 22:
17" 22lr AR15
Warlock 22:
Ruger 22/45
Osprey 45:
1911A1
Glock 30
Glock 27