I'm still learning here.
Having both a 300 Win Mag and .308s....
Dumb question; how well would the Titan work on a .308 (bolt or semi)?
And/or would there be better options for the .308 also?
Best suppressor for 300 Win Mag
Moderators: mpallett, mr fixit, bakerjw
-
blueheeler66
- Member
- Posts: 42
- Joined: Thu Mar 10, 2011 12:36 am
-
.300WinMag
- Silent But Deadly
- Posts: 166
- Joined: Sun Jan 21, 2007 11:06 pm
Re: Best suppressor for 300 Win Mag
A .30 Mag can will likely be slightly better on a .308 depending on how it was designed (likely has an extra baffle). The only negative about a .30mag on a .308 is weight / length differences.
I have a stainless SRT. It is a very good can but it is heavy. If you are slung and shooting movers or multiples it creates a lot of momentum on the T1 to T2... transition. It also radically changes the neutral balance point of the weapon. Aside from that - I dig it.
Good luck
I have a stainless SRT. It is a very good can but it is heavy. If you are slung and shooting movers or multiples it creates a lot of momentum on the T1 to T2... transition. It also radically changes the neutral balance point of the weapon. Aside from that - I dig it.
Good luck
-
WendyReesef
- New Member
- Posts: 1
- Joined: Wed May 06, 2020 10:32 pm
Re: Best suppressor for 300 Win Mag
Bellow is my list of tip picks on best suppressor for 300 Win Mag.
GEMTECH DAGGER SILENCER
Q – FULL NELSON 7.62MM
SILENCERCO SPARROW 22
HARVESTER 300 WINCHESTER MAGNUM
GEMTECH DAGGER SILENCER
Q – FULL NELSON 7.62MM
SILENCERCO SPARROW 22
HARVESTER 300 WINCHESTER MAGNUM
-
Stefan
- Member
- Posts: 35
- Joined: Thu Apr 15, 2010 2:23 pm
- Location: Back from IRQ, AFG, Ft Leavenworth KS
Re: Best suppressor for 300 Win Mag
I have a Thunderbeast 30P-1 and I run it on my .300WM and my .308. The can is relatively light so you see less of a POI shift if any at all. I have been running a very HOT load pushing 210 Berger VLD's at 2975 FPS (CED M2 chrono) with RE22 and the can has no issues.