Some of the guys over at Weaponsguild.com have beat on me till I am running a small one time run of these for several of them who bought suppressors and got screwed on the pistons in the aftermath of the company shutdown........plan currently is to do a one time run of 1/2 x 28 9mm .......and .578 x 28 45 adapters........solid models are being made from sample adapters and will be machined in my shop from 17-4 stainless prehard.
As it is a small run they will be a little pricey...but then again the material to make them is over $220 for a 12 foot stick and we have to write a lathe and mill program for each variation.
5/8 x 24 is being considered as well.......so if you need one....post up here and I will compile quantities and see how much material I need to order.
Expected price will be $100 each shipped......less if the numbers bear it......Let me know in this thread. need to know caliber, thread, and quantity.
Rudy
Shadow Ops suppressor pistons
Moderators: mpallett, bakerjw, renegade
- Mad Machinist
- Member
- Posts: 22
- Joined: Sun Nov 22, 2009 7:16 pm
- Location: Macon Ga
Shadow Ops suppressor pistons
R.N. Koester
Certified Master Engine Machinist
Cpt US Army (dis)
Certified Master Engine Machinist
Cpt US Army (dis)
-
- New Member
- Posts: 1
- Joined: Sun May 13, 2018 2:36 am
Re: Shadow Ops suppressor pistons
I know this post is a few years old, but I was wondering if these pistons were ever produced and if so if there are any still for sale?