AAC "new core" Prodigys ARE HERE!

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Fri Oct 16, 2009 9:14 am

We've got a batch of Prodigys on order from AAC that'll be here as soon as the Form 3 to us is approved!

Gimme a call (918-808-3661) or shoot me a PM if you'd like to get one at our discounted price.

kapkanimd · Post by **kapkanimd** » Fri Oct 16, 2009 6:19 pm

hey Major, I sent you a p/m like a week back titled "Call Me asap" but we ended up speaking on the phone about it, but if you get a chance can you read it and shoot me a p/m to confirm that we have everything straight including the prodigy order. Thanks. I know you were a little busy then, but it seems like you are back in action now

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Fri Oct 16, 2009 7:37 pm

Just sent you a reply to the PM, Keith - we're good to go!

kapkanimd · Post by **kapkanimd** » Mon Nov 02, 2009 6:23 pm

any word on these babies yet??

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Mon Nov 02, 2009 10:48 pm

I asked Mike about 'em last week - the Remington purchase has put everything in a holding pattern for a bit. They're bringing new systems online (ordering, inventory, etc.) and they can't submit Form 3s or ship until everything gets updated.

Bottom line - not sure exactly when they'll ship to us, but I do know that Mike has our order in and will get 'em to us as soon as possible.

Diomed · Post by **Diomed** » Tue Nov 03, 2009 4:03 am

Have you sold out your allotment yet?

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Tue Nov 03, 2009 7:59 am

Diomed wrote:Have you sold out your allotment yet?

No sir - still have a few left that aren't spoken for.

kapkanimd · Post by **kapkanimd** » Mon Nov 16, 2009 8:17 pm

any new news on these....

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Tue Nov 17, 2009 5:52 am

kapkanimd wrote:any new news on these....

I talked to Mike Mers on Friday - AAC still can't bill dealers or ship, due to the Remington swap over to new systems. He did say it should be squared away soon, though.

kapkanimd · Post by **kapkanimd** » Fri Jan 08, 2010 1:58 am

have you heard any new info on these and/or the TiRant .45s?

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Fri Jan 08, 2010 10:19 am

Yes sir!

Spoke w/ Mike yesterday and AAC is in "prep for SHOT Show" mode right now. As soon as they get back from SHOT, they are supposed to ship everything out (they want to get everthing out before the more to the new, mo' bigguh facility).

Once again, very sorry for the wait - but they'll be worth it!

Eagle1* · Post by Eagle1* » Wed Jan 20, 2010 6:12 pm

I sent you a pm regarding some prices on a few AAC cans. Thanks E1*

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Wed Jan 20, 2010 6:56 pm

Reply sent!

chingon · Post by **chingon** » Tue Jan 26, 2010 9:48 pm

Maj,
All my .22 cans are "low budget cans" TAC 65 and Thomp. Machine. I want to get a high end can but am torn between the Element, New core prodigy and Spectre. I have numerous rifle and pistol hosts. What say the "expert"
Ric

okent · Post by **okent** » Wed Jan 27, 2010 12:25 am

I have an Element and a Spectre but can't comment on the Prodigy.
Depends on what you are going to use it for.
I have use the Spectre for full auto and 5.7 and the Element for everything else. I like the knurled base on the Spectre better than the way the Element is put together. I feel like there is something substantial to grab onto when I am taking the can off.
They are both great cans.
Just my 2 cents.

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Wed Jan 27, 2010 4:19 am

chingon wrote:Maj,
All my .22 cans are "low budget cans" TAC 65 and Thomp. Machine. I want to get a high end can but am torn between the Element, New core prodigy and Spectre. I have numerous rifle and pistol hosts. What say the "expert"
Ric

Ric,

Every customers has different criteria of what "good" is, so I'd really have to talk to you on the phone to really be able to figure out which one best suits your needs.

But here's a "roll-up" of each can's qualities:

Element (this can offers the best of everything, except price):
-top notch sound reduction
-made of stainless steel, so very durable
-light weight, a little over 4 oz.
-pusher tool available to help get the baffle stack out

NEGATIVES: highest prices

Prodigy (aluminum, monolithic core):
-top notch sound reduction
-monolithic core
-light weight, a little over 4 oz.

NEGATIVES: No pusher tool available to help get it apart / aluminum construction (you can't be as aggressive as you can on SS when cleaning).

Spectre (the "tank" of .22 cans and our best selling .22 suppressor):
-top notch sound reduction
-made of stainless steel, so very durable
-lowest price of the three
-pusher tool INCLUDED with the can

NEGATIVES: heaviest can of the bunch, over 8 oz.

chingon · Post by **chingon** » Sun Jan 31, 2010 11:12 pm

I'm going with the TANK
PM sent

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Mon Feb 01, 2010 4:46 am

chingon wrote:I'm going with the TANK
PM sent

Reply sent Ric!

tateb24 · Post by **tateb24** » Wed Feb 03, 2010 11:21 pm

Just curious, has the forms for the Prodigys shipped from AAC yet?

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Thu Feb 04, 2010 1:16 am

tateb24 wrote:Just curious, has the forms for the Prodigys shipped from AAC yet?

The approved Form 3s are back at AAC - just waiting for them to ship!

kapkanimd · Post by **kapkanimd** » Thu Feb 11, 2010 9:41 pm

MAJ MALFUNCTION wrote:
The approved Form 3s are back at AAC - just waiting for them to ship!

P/M sent...

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Thu Feb 11, 2010 10:43 pm

kapkanimd wrote:
MAJ MALFUNCTION wrote:
The approved Form 3s are back at AAC - just waiting for them to ship!
P/M sent...

Reply sent.

kapkanimd · Post by **kapkanimd** » Wed Feb 17, 2010 11:11 pm

glad to see that these finally made it out the door and on the way to you!! can you P/M me to make sure you have the right SOT that mine is going to? I know there was some mix ups at the beginning I just want to make sure everything is straight before forms start going out

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Thu Feb 18, 2010 7:33 am

kapkanimd wrote:glad to see that these finally made it out the door and on the way to you!! can you P/M me to make sure you have the right SOT that mine is going to? I know there was some mix ups at the beginning I just want to make sure everything is straight before forms start going out

PM sent!

MAJ MALFUNCTION · Post by **MAJ MALFUNCTION** » Thu Feb 18, 2010 7:34 am

We still have a couple of cans not spoken for out of this incoming batch (it should arrive here tomorrow or early next week).

Gimme a call if you want to get a "new core" Prodigy locked in!!