MiHec 147 grain powder coat hollowpoint mold

Be careful -- low-volume ratio loads can detonate. Mangement not responsible for load data. Use at your own risk.

Moderators: mpallett, bakerjw

Post Reply
wacki
Silent But Deadly
Posts: 913
Joined: Mon Apr 02, 2012 7:00 pm

MiHec 147 grain powder coat hollowpoint mold

Post by wacki »

Great for suppressor folk. Powder coat to reduce leading in suppressors. MiHec makes good stuff. On par with NOE molds.

http://castboolits.gunloads.com/showthr ... iv-coating
Top
Post Reply

Return to “Handloading”