Page 1 of 1
Does anyone have a 9mm 147 Gr. load that has little to no blowback when used on a can?
Posted: Mon Feb 26, 2018 8:11 pm
by moreguns
I have had bad blowback with 45 ACP , till I came up with this load. Now I want to use my octane 45 HD with a 9 end cap and A Rugged suppresors piston I need some suggestions. For 45 ACP I use a Redding duel ring carbide sizer , Federal match standard primer.230 FMJ, 5 grains of 700X and taper crimp-.001" .
Re: Does anyone have a 9mm 147 Gr. load that has little to no blowback when used on a can?
Posted: Sun Mar 11, 2018 9:19 am
by jmorris
A Berry’s 147 RN @ 1.160” with 3.1 of VV N310 or 3.2 gn N320 or 3.2 of Titegroup.
Re: Does anyone have a 9mm 147 Gr. load that has little to no blowback when used on a can?
Posted: Mon Sep 28, 2020 10:51 am
by quiettime
I'm using Xtreme 147 plated HP over 3.6 grains of Titegroup. Very little gunk in the action so far but also 100% reliability