I purchased a TiRant 45 in mid June. Of course I haven't received the stamp yet. Two questions please.
1. This can will fit on a 1/2.28" 9mm host barrel right? I was told I will need to buy the adaptor on the AAC website. Is that all I will need?
2. In mid June I submitted to AAC for their $200 online coupon. I have not heard back from AAC. Normally how long does it take to process, and how will I be notified that I can order from the AAC online store? By email?
Thanks
Two AAC questions.
Moderator: SilentMike
- chrismartin
- Silencertalk Goon Squad
- Posts: 4226
- Joined: Sun Mar 12, 2006 7:18 pm
- Location: Tidewater, VA
Re: Two AAC questions.
Correct. However, make sure you buy the TiRANT 45 piston.Lightsped wrote:I purchased a TiRant 45 in mid June. Of course I haven't received the stamp yet. Two questions please.
1. This can will fit on a 1/2.28" 9mm host barrel right? I was told I will need to buy the adaptor on the AAC website. Is that all I will need?
The TiRANT 45 and TiRANT 9 uses different pistons. You need the TiRANT 45 piston for 9mm 1/2x28. You can see the correct item in the pull down options here:
http://www.silencershop.com/shop/aac-ti-rant-45-piston/
Re: Two AAC questions.
I submitted my rebate last month also. Filled out the online registration and mailed in the required stuff. You should be getting an email soon saying it's been received and being processed.
Use this website to register and also check current submissions: http://aac.rebateaccess.com/
Use this website to register and also check current submissions: http://aac.rebateaccess.com/
Re: Two AAC questions.
Thanks for the help with the technical question. And yes, that link shows my promotional info is "being processed". Hopefully it won't take too long. I am anxious to go shopping!
Re: Two AAC questions.
Lightsped your not alone.
I too am waiting on both my stamp and rebate, on my TiRant 45.
The nice thing about the 45 model is that it is very usable.
I plan to use mine on my SIGs in .45, 9mm & .40.
Lateck,
I too am waiting on both my stamp and rebate, on my TiRant 45.
The nice thing about the 45 model is that it is very usable.
I plan to use mine on my SIGs in .45, 9mm & .40.
Lateck,
-
- Member
- Posts: 11
- Joined: Wed Feb 21, 2007 10:48 am
- Location: GA
Re: Two AAC questions.
I received my rebate, but most of the 51t mounts that I am looking for are out of stock.
I hope that they come back into stock soon.
I hope that they come back into stock soon.
Re: Two AAC questions.
Most of them will be back in stock next week.arlessinfl wrote:I received my rebate, but most of the 51t mounts that I am looking for are out of stock.
I hope that they come back into stock soon.