Mike,
Will AAC sell the TiRant with the 3lug piston as a set?
When do you think you would get a outcome on the 3lug piston being a sellable adapter?
Thanks.
AAC Ti-Rant 9mm...
Moderator: SilentMike
Re: AAC Ti-Rant 9mm...
I just got email from a distributor that AAC will be producing the TiRant 3 lug adapter in March.. If this is true, then sounds like everything is moving forward.
Re: AAC Ti-Rant 9mm...
3lug for TiRant will look sexy on the mp5.
Re: AAC Ti-Rant 9mm...
I will swap to the Ti-Rant once the 3-lug is approved
Re: AAC Ti-Rant 9mm...
Today is March 1st.Ryo wrote:I just got email from a distributor that AAC will be producing the TiRant 3 lug adapter in March.. If this is true, then sounds like everything is moving forward.
Where's the vapor ware?
Re: AAC Ti-Rant 9mm...
i'm not trying to cut them slack on a product that was announced 2/3 years ago, but "producing in March" doesn't mean ready to buy on Sat, mar 1. You'll be lucky if they are machined in March, maybe finished and QC'd end of the month, maybe end of April by the time they make it through the distribution chain.karb wrote:Today is March 1st.Ryo wrote:I just got email from a distributor that AAC will be producing the TiRant 3 lug adapter in March.. If this is true, then sounds like everything is moving forward.
Where's the vapor ware?
Kick Ass Design
ten:pm media
www.facebook.com/VisualGravy
ten:pm media
www.facebook.com/VisualGravy
Re: AAC Ti-Rant 9mm...
Any update on this?
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
Re: AAC Ti-Rant 9mm...
The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
Re: AAC Ti-Rant 9mm...
This is great news! I've been waiting for this for a very long time.1_ar_newbie wrote: We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
So now that it's "in production" - how long before it shows up on the website and is available to purchase or pre-order?
Re: AAC Ti-Rant 9mm...
Ok, Mike...
We are close to the end of march, so as my daughter would say... "Make with the pony!"
Where will these be listed for sale? How can I be the first kid on my block to get one?
We are close to the end of march, so as my daughter would say... "Make with the pony!"
Where will these be listed for sale? How can I be the first kid on my block to get one?
Re: AAC Ti-Rant 9mm...
Should I order the tri lug barrel for my Uzi now?1_ar_newbie wrote:The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
Re: AAC Ti-Rant 9mm...
I wouldkarb wrote:Should I order the tri lug barrel for my Uzi now?1_ar_newbie wrote:The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
Re: AAC Ti-Rant 9mm...
Would the 3 lug be the best mount for running a Ti-rant 9 on a 9mm AR
- continuity
- Elite Member
- Posts: 4554
- Joined: Thu Dec 11, 2008 6:39 am
- Location: Ohio
Re: AAC Ti-Rant 9mm...
I use a thread on Ti-Rant. No problems.rgb03 wrote:Would the 3 lug be the best mount for running a Ti-rant 9 on a 9mm AR
What amount of a man is composed of his own collection of experiences... and the conclusions that those experiences have allowed him to "know" for certain as "Truth"? :Ick
- continuity
- Elite Member
- Posts: 4554
- Joined: Thu Dec 11, 2008 6:39 am
- Location: Ohio
Re: AAC Ti-Rant 9mm...
EFC
Last edited by continuity on Mon Mar 31, 2014 4:05 am, edited 4 times in total.
What amount of a man is composed of his own collection of experiences... and the conclusions that those experiences have allowed him to "know" for certain as "Truth"? :Ick
- continuity
- Elite Member
- Posts: 4554
- Joined: Thu Dec 11, 2008 6:39 am
- Location: Ohio
Re: AAC Ti-Rant 9mm...
My 9mm AR has a 5" green mountain(?) barrel. The Ti-Rant suppressor seats on the barrel shoulder. I don't use the piston on the AR... at least as a piston. Replace the spring with the hard spacer.rgb03 wrote:...
What amount of a man is composed of his own collection of experiences... and the conclusions that those experiences have allowed him to "know" for certain as "Truth"? :Ick
Re: AAC Ti-Rant 9mm...
Uzi tri lug 8.5" showed up in the mail today. Guess what my tirant needs?1_ar_newbie wrote:I wouldkarb wrote:Should I order the tri lug barrel for my Uzi now?1_ar_newbie wrote:The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
Re: AAC Ti-Rant 9mm...
Probably the same thing my Glock-pattern 9mm AR needs.karb wrote:Uzi tri lug 8.5" showed up in the mail today. Guess what my tirant needs?
I ordered a 1/2 x 28 tri-lug adapter from HK Parts. It looks a lot better on an MP5 than a AR style rifle. Now I just need a quick attach adapter for my Ti-Rant 9.
Re: AAC Ti-Rant 9mm...
My barrel has the lugs milled into it. I don't need that adapter in your picture.T-Bone wrote:Probably the same thing my Glock-pattern 9mm AR needs.karb wrote:Uzi tri lug 8.5" showed up in the mail today. Guess what my tirant needs?
I ordered a 1/2 x 28 tri-lug adapter from HK Parts. It looks a lot better on an MP5 than a AR style rifle. Now I just need a quick attach adapter for my Ti-Rant 9.
I need AAC to send me the adapter that screws into the back of my tirant .45.
So it'll go on said barrel.
Re: AAC Ti-Rant 9mm...
So.... any news?
Re: AAC Ti-Rant 9mm...
Sigh... hopes, dreams... fading...
Re: AAC Ti-Rant 9mm...
Come on Mers - give us an update! You tease it and then leave us hanging for six weeks.1_ar_newbie wrote:The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
...then again, we've been waiting for a TiRant tri-lug adapter for how many years now? I shouldn't be surprised.
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
Re: AAC Ti-Rant 9mm...
We have some parts made and are waiting for machine time to make the others.T-Bone wrote:Come on Mers - give us an update! You tease it and then leave us hanging for six weeks.1_ar_newbie wrote:The news is as follows
We have tested this and it works 100% (no surprise). We are now making parts.
once all parts are made we will launch this adapter.
Sorry for the delays.... all of them
...then again, we've been waiting for a TiRant tri-lug adapter for how many years now? I shouldn't be surprised.
I am working this in between all of the SR-5 and SR-7 parts so it is taking longer than I thought.
again, sorry for the delays
Mike
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!