Is there any aluminum in the Omni? (Dip/Finish Question)
Moderator: SilentMike
Is there any aluminum in the Omni? (Dip/Finish Question)
Is it vinegar/peroxide dip safe? I have the dip ready from cleaning out my Spectre, and would like to know before I dispose of it if it wouldn't hurt to drop the Omni in. What finish is on the Omni?
Last edited by USMC0351 on Thu May 27, 2010 11:11 am, edited 1 time in total.
-
- Silent But Deadly
- Posts: 468
- Joined: Sun Dec 07, 2008 9:16 pm
- Location: Jacksonville, TX
Re: Is there any aluminum in the AAC Omni? (Dip Question)
it has to be made of all SS or inconel otherqise it will eat/corrode the s--t outta it. regualar non SS steal will corrode rapidly when exposed to the dip.
Jeremy
Jeremy
- 1_ar_newbie
- Industry Professional
- Posts: 1975
- Joined: Mon Jan 14, 2008 8:31 pm
- Location: Atlanta, GA
Re: Is there any aluminum in the Omni? (Dip/Finish Question)
The Omni has no aluminum and would not be damged by the dip.
Is the dip safe? Well, not if you ask me.
Is the dip safe? Well, not if you ask me.
Mike Mers
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
L.E. and Commercial Sales
Advanced Armament Corp.
770-925-9988 x 101 (phone)
770-925-9989 (fax)
[email protected]
Gun Gallery 4 Life!
Re: Is there any aluminum in the Omni? (Dip/Finish Question)
Good call. I tried it for 12 hours to test it. Suppressor looks bright and shiny on the inside, but the finish just wiped right off the outside. What finish comes on these? I was not expecting that to happen...1_ar_newbie wrote:The Omni has no aluminum and would not be damged by the dip.
Is the dip safe? Well, not if you ask me.
Re: Is there any aluminum in the Omni? (Dip/Finish Question)
USMC0351 wrote:Good call. I tried it for 12 hours to test it. Suppressor looks bright and shiny on the inside, but the finish just wiped right off the outside. What finish comes on these? I was not expecting that to happen...1_ar_newbie wrote:The Omni has no aluminum and would not be damged by the dip.
Is the dip safe? Well, not if you ask me.
most likely Moly Resin™
can be sprayed with high temp grill paint or the like.
Kick Ass Design
Re: Is there any aluminum in the Omni? (Dip/Finish Question)
I figured on some grill paint or Gunkote since I have some sitting around. I'm not too worried about the appearance, but want to be sure I protect it with something.
Re: Is there any aluminum in the Omni? (Dip/Finish Question)
Update with new finish.