ID this muzzle device?

doubloon · Post by **doubloon** » Fri Oct 28, 2011 2:22 pm

It's the thing in the picture that looks like this.

ROFuher · Post by **ROFuher** » Fri Oct 28, 2011 2:43 pm

What is a 300-SD 90 tooth ratchet mount?

kdcgrohl · Post by **kdcgrohl** » Fri Oct 28, 2011 2:43 pm

doubloon wrote:It's the thing in the picture that looks like this.

Maybe it's just me, but I see the threads, but no teeth...

Oh wait, are those very tiny teeth at the rear of the device?

chainring · Post by **chainring** » Fri Oct 28, 2011 3:26 pm

doubloon wrote:It's the thing in the picture that looks like this.

Look a bit closer, boss.

300SD 90 toother, eh? Off to Google...

Ctaylor · Post by **Ctaylor** » Fri Oct 28, 2011 3:35 pm

I had a feeling someone else would notice this, and that's about all I'm allowed to say...

chainring · Post by **chainring** » Fri Oct 28, 2011 3:55 pm

Ctaylor wrote:I had a feeling someone else would notice this, and that's about all I'm allowed to say...

Not cool. Perhaps you could pm me?

Ctaylor · Post by **Ctaylor** » Fri Oct 28, 2011 4:00 pm

Alas my lips are sealed until I am told otherwise. I really don't know anything other than what one might be able to guess from the photos.

yamatitan · Post by **yamatitan** » Fri Oct 28, 2011 4:12 pm

Its a little different from all the 90 tooth mounts ive currently seen. Im thinking we may have a new mounting system for the 5.56 and 7.62 cans?

GlocksInMySocks · Post by **GlocksInMySocks** » Fri Oct 28, 2011 7:52 pm

hopefully it wil be something really cool and new that will come out right after I have waited a decade for the ATF to process my paperwork on a now outdated model haha

JasonM · Post by **JasonM** » Fri Oct 28, 2011 8:07 pm

GlocksInMySocks wrote:hopefully it wil be something really cool and new that will come out right after I have waited a decade for the ATF to process my paperwork on a now outdated model haha

There will always be something really cool and new that will come out right after or, more likely, during your BATFE wait.

jaredr · Post by **jaredr** » Fri Oct 28, 2011 9:07 pm

oh for f-ck's sake i just put 51t mounts on my .223 and .30 rifles. i'm going to have vacation in south america where I can contract some disease that causes me to s--t money for muzzle devices...

J Krammes · Post by **J Krammes** » Fri Oct 28, 2011 9:09 pm

I hope this is something special, and won't make the 51T mount go the same rout the 18T did. Or at least I can still use my 51T can with this mount.

Jk

chainring · Post by **chainring** » Fri Oct 28, 2011 9:45 pm

GlocksInMySocks wrote:hopefully it wil be something really cool and new that will come out right after I have waited a decade for the ATF to process my paperwork on a now outdated model haha

For real. Just sold an 18 tooth 762SD and I'm 2 months into the wait on a new 762SD-N6, and they pull this on me. More teeth for a tighter lockup and an OpsInc-style ramped collar design. Oh, well...I don't even have a .308 at the moment.

GlocksInMySocks · Post by **GlocksInMySocks** » Fri Oct 28, 2011 9:57 pm

JasonM wrote:
GlocksInMySocks wrote:hopefully it wil be something really cool and new that will come out right after I have waited a decade for the ATF to process my paperwork on a now outdated model haha
There will always be something really cool and new that will come out right after or, more likely, during your BATFE wait.

ha, i know, not a gripe at all and I apologize if it came out that way. It was more of a laugh at this whole ATF process than anything else. Personally, I kind of like the allure of the bigger better deal always on the horizon. Keeps the industry moving forward.

doubloon · Post by **doubloon** » Fri Oct 28, 2011 11:29 pm

kdcgrohl wrote:
doubloon wrote:It's the thing in the picture that looks like this.

http://www.kygunco.com/prodimages/18735-DEFAULT-L.jpg
Maybe it's just me, but I see the threads, but no teeth...

Oh wait, are those very tiny teeth at the rear of the device?

Nope, I don't see any teeth on the one in the original pic either. It looked like a toothless blackout but I couldn't find it so I tried to make a funny.

Ctaylor · Post by **Ctaylor** » Fri Oct 28, 2011 11:45 pm

No, there are teeth. There are some other photos of the same mount running around.

chainring · Post by **chainring** » Sat Oct 29, 2011 12:29 am

J Krammes · Post by **J Krammes** » Sat Oct 29, 2011 5:03 am

OK. How about someone ID that forend...

Jk

Wicked · Post by **Wicked** » Sat Oct 29, 2011 2:23 pm

LWRC?

Can someone blow up the pic to get a better look at the magwell so we can see the markings a bit better?

JasonM · Post by **JasonM** » Sat Oct 29, 2011 2:27 pm

Wicked wrote:LWRC?

Can someone blow up the pic to get a better look at the magwell so we can see the markings a bit better?

file name is "lwrc300sd.jpg"... LWRC 300 BLK gun?

Wicked · Post by **Wicked** » Sat Oct 29, 2011 2:31 pm

That's EXACTLY what I was thinking!

eric10mm · Post by **eric10mm** » Sat Oct 29, 2011 2:48 pm

jaredr wrote:oh for f-ck's sake i just put 51t mounts on my .223 and .30 rifles. i'm going to have vacation in south america where I can contract some disease that causes me to s--t money for muzzle devices...

So, uhh, how much do you want for your used, out-of-date, old-style mounts?

warjunky1428 · Post by **warjunky1428** » Sat Oct 29, 2011 3:03 pm

Someone put there weapon back in the rack still on auto....

It looks like those for ends are monolithic with the upper, am I seeing that correctly? I've been out of the loop for the previous part of this entire year so I'm trying to catch up. Is that an ambidextrous charging handle latch lever as well? I guess they made the change on the upper receiver too for that.

Ctaylor · Post by **Ctaylor** » Sat Oct 29, 2011 3:15 pm

This gun is (was?) LWRC's entry into the Army's Individual Carbine competition. It's up in the air right now wether or not they're actually going to enter.

(edit, more photos from Lightfighter)

ID this muzzle device?

ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?

Re: ID this muzzle device?