m4-1000 18T muzzle brake

Company specific discussions and announcements.

Moderator: SilentMike

drkhrs2
New Member
Posts: 5
Joined: Sat Oct 18, 2008 3:40 pm

Re: m4-1000 18T muzzle brake

Post by drkhrs2 » Mon Feb 20, 2012 3:01 pm

Gracias Mike. I owe you an argyle sweater.

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Tue Feb 21, 2012 12:41 pm

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?
You da man! :D :D I thank you, my 223/5.56 rifles thank you AND my 762SD thanks you!
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

imyomama
Silent But Deadly
Posts: 1157
Joined: Tue Mar 17, 2009 3:51 pm
Location: N38° 53.8607', W077° 2.191'

Re: m4-1000 18T muzzle brake

Post by imyomama » Tue Feb 21, 2012 3:42 pm

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?
you DA man!
-------------------------------------------------------
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales

FA Gunner
Silent Operator
Posts: 68
Joined: Wed Feb 07, 2007 2:40 pm

Re: m4-1000 18T muzzle brake

Post by FA Gunner » Wed Feb 22, 2012 4:44 pm

I need 2 of these also. Held off buying any in the first batch since I had some higher priority purchases, but now have funds and can't find any.

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Fri Mar 16, 2012 6:54 am

Just posting to keep this on the first page so no one forgets about us. :lol:
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

imyomama
Silent But Deadly
Posts: 1157
Joined: Tue Mar 17, 2009 3:51 pm
Location: N38° 53.8607', W077° 2.191'

Re: m4-1000 18T muzzle brake

Post by imyomama » Fri Mar 16, 2012 10:12 am

jreinke wrote:Just posting to keep this on the first page so no one forgets about us. :lol:
yes , I hope Mers comes back by and visits this page from time to time and keeps us updated...
-------------------------------------------------------
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales

User avatar
Kane
Member
Posts: 48
Joined: Tue Feb 16, 2010 10:23 pm
Location: Crane, Texas
Contact:

Re: m4-1000 18T muzzle brake

Post by Kane » Fri Mar 16, 2012 10:56 am

We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104
FFL/SOT
S&K Arms Co.
www.SKarms.com
[email protected]

imyomama
Silent But Deadly
Posts: 1157
Joined: Tue Mar 17, 2009 3:51 pm
Location: N38° 53.8607', W077° 2.191'

Re: m4-1000 18T muzzle brake

Post by imyomama » Fri Mar 16, 2012 6:05 pm

Kane wrote:We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104
thanks .. bought them both!

crap .. I may need to cancel my order .. these look from the pic to be 5/8x24 ... m4-1000 is a 556 can , and 556 guns have 1/2x28 thread pitch!!

please advise!!!
-------------------------------------------------------
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales

User avatar
Kane
Member
Posts: 48
Joined: Tue Feb 16, 2010 10:23 pm
Location: Crane, Texas
Contact:

Re: m4-1000 18T muzzle brake

Post by Kane » Fri Mar 16, 2012 6:24 pm

imyomama wrote:
Kane wrote:We have 2 18t Muzzle Brakes instock:
http://www.skarms.com/index.php?route=p ... uct_id=104
thanks .. bought them both!

crap .. I may need to cancel my order .. these look from the pic to be 5/8x24 ... m4-1000 is a 556 can , and 556 guns have 1/2x28 thread pitch!!

please advise!!!
They are for the 5.56. Looks like our web designer has the wrong image selected. Sorry for any confusion
FFL/SOT
S&K Arms Co.
www.SKarms.com
[email protected]

cajun 22
Silent But Deadly
Posts: 247
Joined: Sat Nov 14, 2009 4:40 pm
Location: LA, USA

Re: m4-1000 18T muzzle brake

Post by cajun 22 » Sat Mar 17, 2012 1:28 am

Well, I wish anyone else that has these in stock would chime in.

imyomama
Silent But Deadly
Posts: 1157
Joined: Tue Mar 17, 2009 3:51 pm
Location: N38° 53.8607', W077° 2.191'

Re: m4-1000 18T muzzle brake

Post by imyomama » Tue Mar 20, 2012 8:52 am

Thank you Kane, got them yesterday... Installed one on my 12.5" pws.. I hope this helps with the erosion i'm seeing from my m4-1000. less than 1k rounds through it and baffles have jagged edges...
-------------------------------------------------------
"Are you gonna pull those pistols or whistle Dixie?" --- Clint Eastwood --- The Outlaw Josey Wales

User avatar
Kane
Member
Posts: 48
Joined: Tue Feb 16, 2010 10:23 pm
Location: Crane, Texas
Contact:

Re: m4-1000 18T muzzle brake

Post by Kane » Tue Mar 20, 2012 10:05 am

Good deal, glad they worked out for you.
imyomama wrote:Thank you Kane, got them yesterday... Installed one on my 12.5" pws.. I hope this helps with the erosion i'm seeing from my m4-1000. less than 1k rounds through it and baffles have jagged edges...
FFL/SOT
S&K Arms Co.
www.SKarms.com
[email protected]

User avatar
tigerdog
Senior Silent Operator
Posts: 119
Joined: Tue Mar 11, 2008 11:33 pm
Location: Georgia

Re: m4-1000 18T muzzle brake

Post by tigerdog » Mon Mar 26, 2012 10:30 am

Any other dealers out there have any? Chime in please !!!

-Tdog
..."And when I vest my flashing sword And my hand takes hold in judgement, I will take vengeance upon mine enemies And I will repay those who hase me O Lord. "

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Sun Apr 29, 2012 7:56 am

1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?
T minus 2 months and counting! :wink:
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

User avatar
teamroper
Silent Operator
Posts: 66
Joined: Wed Apr 09, 2008 11:17 pm
Location: SW Oklahoma

Re: m4-1000 18T muzzle brake

Post by teamroper » Thu May 17, 2012 6:29 pm

I'm in for one!! Sure hope this happens, 100 would sell out easily I bet!!!
All Major-Malfunction Purchases

AAC M4-2K SM4 mod06
AAC M4-2K mod08
AAC M4-1K mod08
Gemtech Multi-Mount
Gemtech Tundra Desert Tan
Gemtech Oasis Ruger MKII 22/45
SWR Warlock QD
YHM Mite SS QD
YHM Mite QD

User avatar
kletzenklueffer
Senior Silent Operator
Posts: 142
Joined: Mon Oct 24, 2005 2:59 pm

Re: m4-1000 18T muzzle brake

Post by kletzenklueffer » Fri Jun 08, 2012 12:14 pm

Keeping it on page 1.

Mike? Any update?

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Thu Jun 28, 2012 7:34 am

jreinke wrote:
1_ar_newbie wrote:I think this is do-able

However, I need to work through the SHOT show backlog.

Let's try this at the end of the second quarter?
T minus 2 months and counting! :wink:
T minus 2 DAYS and counting! Have the mounts been scheduled or do we have to wait for the end of the third quarter? :roll:
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

cpatterson86
Silent Operator
Posts: 54
Joined: Thu May 24, 2012 11:06 am
Location: GA

Re: m4-1000 18T muzzle brake

Post by cpatterson86 » Thu Jun 28, 2012 9:41 am

If all goes according to plan, these should be shipping to dealers late August / early September. Sorry for the delay, but they are going to happen!

drkhrs2
New Member
Posts: 5
Joined: Sat Oct 18, 2008 3:40 pm

Re: m4-1000 18T muzzle brake

Post by drkhrs2 » Mon Jul 02, 2012 6:08 pm

Cade,

Can we order them direct from AAC?

Thanks.

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Fri Jul 27, 2012 2:46 pm

cadepatterson wrote:If all goes according to plan, these should be shipping to dealers late August / early September. Sorry for the delay, but they are going to happen!
Who will "the dealers" be? I'm assuming Major Malfunction will be one.
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

FA Gunner
Silent Operator
Posts: 68
Joined: Wed Feb 07, 2007 2:40 pm

Re: m4-1000 18T muzzle brake

Post by FA Gunner » Mon Jul 30, 2012 10:38 am

This is great, I know what I will be spending my gun budget on for Sept.

User avatar
jreinke
Silent But Deadly
Posts: 1227
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: m4-1000 18T muzzle brake

Post by jreinke » Mon Aug 27, 2012 8:15 am

Getting pretty close to September....so what's the status? I've got $300 burning a hole in my pocket for two mounts!
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

User avatar
Smilodon
Silent But Deadly
Posts: 489
Joined: Tue Jun 03, 2008 12:14 pm
Location: Central WI
Contact:

Re: m4-1000 18T muzzle brake

Post by Smilodon » Tue Sep 04, 2012 12:38 pm

I need one too.
www.sabrewerks.com
[email protected]

FA Gunner
Silent Operator
Posts: 68
Joined: Wed Feb 07, 2007 2:40 pm

Re: m4-1000 18T muzzle brake

Post by FA Gunner » Wed Sep 05, 2012 5:12 pm

Hopefully these will be out soon, before I spend my money on other things.

User avatar
tigerdog
Senior Silent Operator
Posts: 119
Joined: Tue Mar 11, 2008 11:33 pm
Location: Georgia

Re: m4-1000 18T muzzle brake

Post by tigerdog » Sat Sep 08, 2012 11:54 pm

Any updated info Cade?
Thanks!
-Tdog
..."And when I vest my flashing sword And my hand takes hold in judgement, I will take vengeance upon mine enemies And I will repay those who hase me O Lord. "

Post Reply