Looking for barrel specs/diagrams for 3rd Model PSS Medium and M40A3 M24 Heavy.
Also need same for .30 cal 12th Model
Thanks
Barrel specs/diagram
Moderator: k31user
Re: Barrel specs/diagram
I just sent copies of these two drawings to someone in CT. If you are a different person, email or pm me a fax number to send them to and I can get them out tomorrow when I go to the shop.
[email protected]
Ron
[email protected]
Ron
Re: Barrel specs/diagram
Ron,
I've asked for barrel spec drawings from you guys a number of times over the years and I'm yet to receive anything.
Can you email them in .pdf format? Hell, you can snail mail us a copy if you want. Faxes don't work well for drawings. Murphys law being what it is, there's always a glitch on the fax on some important dimension.
If it's proprietary info and there's someone who you specifically send people to, you might want to let your customers know, as judging from the calls and emails we get there's no info available to them as to who exactly that is.
I've asked for barrel spec drawings from you guys a number of times over the years and I'm yet to receive anything.
Can you email them in .pdf format? Hell, you can snail mail us a copy if you want. Faxes don't work well for drawings. Murphys law being what it is, there's always a glitch on the fax on some important dimension.
If it's proprietary info and there's someone who you specifically send people to, you might want to let your customers know, as judging from the calls and emails we get there's no info available to them as to who exactly that is.
Tornado Technologies
Mailing Address:
22115 NW Imbrie Drive #181
Hillsboro OR 97124
PH: (503)690-8000
Web: www.tornado-technologies.com
Mailing Address:
22115 NW Imbrie Drive #181
Hillsboro OR 97124
PH: (503)690-8000
Web: www.tornado-technologies.com
Re: Barrel specs/diagram
I try to refer people to ADCO Firearms for the machine work if possible, but I don't have a problem sending drawings out.
For the record. The 3rd model medium wt is no longer made.
Ron
For the record. The 3rd model medium wt is no longer made.
Ron
Re: Barrel specs/diagram
Can you post them on your website or here? Adco can be pretty hard to reach at times so it would be nice for people to have another source for barrel profiling.
-
- Senior Silent Operator
- Posts: 128
- Joined: Tue Apr 14, 2009 9:08 pm
- Location: NW Missouri
Re: Barrel specs/diagram
I need this information as well. Please send to: william.kinderknecht (at) gmail.comTCA12 wrote:Looking for barrel specs/diagrams for 3rd Model PSS Medium and M40A3 M24 Heavy.
Also need same for .30 cal 12th Model
Thanks
Thank you
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Barrel specs/diagram
homeless wrote:Can you post them on your website or here? Adco can be pretty hard to reach at times so it would be nice for people to have another source for barrel profiling.
+1
Can you please post the specs for all your cans on your website? I have customers that are asking for them and don't want to deal with Adco.
Simple .pdf link on your website will be fine that way we can print them out.
Thanks!
-B
Re: Barrel specs/diagram
Ron, could you please email drawings for the 16th model collar to ryanscottborman at gmail.com? I emailed without response and I can't have ADCO do it this time because the rifle is a ground up build by a bolt gun guy. Thank you.