Beretta M9 slide lock

tomz34 · Post by **tomz34** » Mon Dec 03, 2007 11:07 pm

Are these avaliable to the civilian market? If so where and how much?

3 · Post by 3 » Tue Dec 04, 2007 9:10 am

The snap-on 9mm is not currently in production.

Variable556 · Post by **Variable556** » Mon Dec 10, 2007 11:44 pm

Snap-on? I thought it was a permanent mod to the frame. Either way, I would love to get my hands on one. Maybe enough could be drummed up around here to warrant a small run?

dane421 · Post by **dane421** » Tue Dec 11, 2007 1:01 am

I would be interested if we could get the price

cmdecker · Post by **cmdecker** » Tue Dec 11, 2007 8:18 am

Variable556 wrote:Snap-on? I thought it was a permanent mod to the frame. Either way, I would love to get my hands on one. Maybe enough could be drummed up around here to warrant a small run?

The slide lock is a permanent mod to the frame of the pistol. When this was in production it came from Knights with a modified Beretta pistol and a Snap-on suppressor. If you can find one and have the funds availible, get it. This is as quiet as it gets on a center fire pistol.

mk23 · Post by **mk23** » Tue Dec 11, 2007 12:49 pm

I would take one too..

theke · Post by **theke** » Tue Dec 11, 2007 6:49 pm

I just posted a KAC Suppressor and Slide lock kit in the for
sale section.

KW

[/img]

3 · Post by 3 » Tue Dec 11, 2007 10:24 pm

To my knowledge this was never sold in a kit form . Do you know the history of this kit? I have been wrong before but I thought all snap-ons were produced with pistols only.
We have a small number of snap-ons availible (not enough to satisfy the market)and I am working on a fair way to decide who should get them. I am tossing the idea of a lottery around. We have some parts in inventory and we will do a run after we get some of the other things we need to do done.

mk23 · Post by **mk23** » Wed Dec 12, 2007 6:34 pm

I would be up for a lottery.

Sounds like a fair way.

Count me in.

Variable556 · Post by **Variable556** » Thu Dec 13, 2007 8:41 pm

I just need the slide lock.

I would be up for a Hush puppy too, but there is an SWR Trident waiting for me at my dealer now. I didn't even know Hush puppies could still be had until I found this section of the board. I wanted the full package real bad, but gave up years ago, because I was told back then I couldn't redo the wipes myself. Now I know better, but I already bought a Trident.

I would VERY MUCH love to get the slide lock as a kit though. Any chance on purchasing those parts seperately?

3 · Post by 3 » Thu Dec 13, 2007 9:35 pm

Cutting the notch in the slide requires a pretty high level of "gun-smithing" . These pistols packages are comparable to a Mk-23 and silencer package in price. I feel the snap-on is as if not more desirable than a Mk-23 package. even though KAC products cost more they tend to hold there value ;especially silencers.

Variable556 · Post by **Variable556** » Fri Dec 14, 2007 1:08 am

I hope I didn't offend.

I agree with you totally, I simply don't have the same budget now (Insert wife and kids)

that I had when I originally found out about your package ('96-'97?). I use lots of Knight parts on AR builds etc.

I already have a Beretta M9, and I have a Trident awaiting transfer. I would gladly pay to have a slidelock installed, or barring that, I'd gladly purchase the parts for the slide lock and hold Knight's blameless for the end result of my using self/aftermarket installation. I love KAC gear! I just can't always afford the whole monty.

3 · Post by 3 » Fri Dec 14, 2007 9:26 am

I understand completely .I have two kids too. No offense taken. You can't eat guns. You would have to buy something ridiculous for your wife to work up that kind of "credit". I think that is one of the great things about ARs is that you can do it a little at a time.

Variable556 · Post by **Variable556** » Fri Dec 14, 2007 9:30 pm

3 wrote:I think that is one of the great things about ARs is that you can do it a little at a time.

Well see... I'm kind of trying to do that with an M9....

An M9 here, a suppressor there, and then... maybe a slide lock?....

CKxx · Post by **CKxx** » Sat Oct 18, 2008 10:52 am

I'm going to BUMP this out of oblivion...

Any status change on the possibility of selling them again, either as a complete gun, or kit?

Kelly Powell · Post by **Kelly Powell** » Sat Oct 18, 2008 2:26 pm

If they ran a batch, I would find the money to buy one. Ooohhh, I want one of these bad.

USMCsilver · Post by **USMCsilver** » Mon Mar 02, 2009 12:07 pm

Let's see this back up for '09.

mk23 · Post by **mk23** » Mon Mar 02, 2009 12:51 pm

I would by one too, in a heart-beat!

cwilliams · Post by **cwilliams** » Mon Mar 02, 2009 12:54 pm

anyone have pictures of this beast?

USMCsilver · Post by **USMCsilver** » Mon Mar 02, 2009 1:21 pm

sgtmajor wrote:anyone have pictures of this beast?

https://armamentsales.sslpowered.com/pi ... Mk9_M9.jpg

AngryFish · Post by **AngryFish** » Mon Mar 02, 2009 9:29 pm

I would be on board for one if they ran another batch.

cmdecker · Post by **cmdecker** » Tue Mar 03, 2009 8:27 am

sgtmajor wrote:anyone have pictures of this beast?

Scroll about halfway down this link and there are some pictures of mine. viewtopic.php?t=13729&highlight=

cwilliams · Post by **cwilliams** » Tue Mar 03, 2009 8:53 am

cmdecker wrote:
sgtmajor wrote:anyone have pictures of this beast?
Scroll about halfway down this link and there are some pictures of mine. viewtopic.php?t=13729&highlight=

very nice. i wonder if trey will still get one of these runs together?

Hatchetjoe · Post by **Hatchetjoe** » Tue Mar 03, 2009 10:09 am

I would also be up for a slide lock.

ArevaloSOCOM · Post by **ArevaloSOCOM** » Tue Mar 03, 2009 10:31 am

I don't have a M9 or want one.

But if you do this slide lock, I'll buy one.

TIA.

Beretta M9 slide lock

Beretta M9 slide lock

Hushpuppy/Snap-on + Slide lock kit